[ 0.641279] TCP: Hash tables configured (established 262144 bind 65536) [ 0.641301] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.641594] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.641905] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.641915] PCI: CLS 0 bytes, default 64 [ 0.641957] Unpacking initramfs... [ 0.647933] Initialise system trusted keyrings [ 0.647967] workingset: timestamp_bits=42 max_order=23 bucket_order=0 [ 0.664005] xor: measuring software checksum speed [ 0.666657] 8regs : 3713 MB/sec [ 0.669311] 32regs : 3711 MB/sec [ 0.670228] arm64_neon : 10760 MB/sec [ 0.670230] xor: using function: arm64_neon (10760 MB/sec) [ 0.670234] Key type asymmetric registered [ 0.670236] Asymmetric key parser 'x509' registered [ 0.670247] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.670251] io scheduler mq-deadline registered [ 0.670254] io scheduler kyber registered [ 0.673021] vreg_s4c_1p8: Setting 1856000-2000000uV [ 0.673021] vreg_bob1: Setting 3008000-3960000uV [ 0.673074] vreg_l1d_0p8: Setting 880000-880000uV [ 0.673216] vreg_l1c_1p2: Setting 1200000-1200000uV [ 0.673229] vreg_bob2: Setting 2504000-3008000uV [ 0.673234] vreg_l2d_0p9: Setting 912000-912000uV [ 0.673241] vreg_l2e_0p8: Setting 880000-880000uV [ 0.673266] vreg_s1f_0p7: Setting 700000-1100000uV [ 0.673282] vreg_l1i_1p8: Setting 1800000-1800000uV [ 0.673333] vreg_s5j_1p2: Setting 1256000-1304000uV [ 0.673374] vreg_l2b_3p0: Setting 3072000-3072000uV [ 0.673604] vreg_l2c_0p8: Setting 880000-880000uV [ 0.673627] vreg_l3e_1p2: Setting 1200000-1200000uV [ 0.673632] vreg_l3d_1p8: Setting 1800000-1800000uV [ 0.673663] vreg_l2i_1p2: Setting 1200000-1200000uV [ 0.673664] vreg_l1j_0p8: Setting 912000-912000uV [ 0.673668] vreg_l4b_1p8: Setting 1800000-1800000uV [ 0.673835] vreg_l6b_1p8: Setting 1800000-2960000uV [ 0.674245] vreg_l3c_0p8: Setting 912000-912000uV [ 0.674246] vreg_l8b_3p0: Setting 3072000-3072000uV [ 0.674247] vreg_l2j_1p2: Setting 1256000-1256000uV [ 0.674247] vreg_l3i_0p8: Setting 880000-880000uV [ 0.674535] vreg_l9b_2p9: Setting 2960000-2960000uV [ 0.674535] vreg_l3j_0p8: Setting 880000-880000uV [ 0.674625] vreg_l10b_1p8: Setting 1800000-1800000uV [ 0.674736] vreg_l12b_1p2: Setting 1200000-1200000uV [ 0.674818] vreg_l13b_3p0: Setting 3072000-3072000uV [ 0.674922] vreg_l14b_3p0: Setting 3072000-3072000uV [ 0.674993] vreg_l15b_1p8: Setting 1800000-1800000uV [ 0.675068] vreg_l17b_2p5: Setting 2504000-2504000uV [ 0.676388] loop: module loaded [ 0.676478] spmi_pmic_arb c400000.arbiter: PMIC arbiter version v7 (0x70000001) [ 0.690439] tun: Universal TUN/TAP device driver, 1.6 [ 0.701237] ledtrig-cpu: registered to indicate activity on CPUs [ 0.701269] efifb: probing for efifb [ 0.701283] efifb: framebuffer at 0xe4800000, using 4544k, total 4542k [ 0.701285] efifb: mode is 1360x855x32, linelength=5440, pages=1 [ 0.701288] efifb: scrolling: redraw [ 0.701290] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.705197] Console: switching to colour frame buffer device 170x53 [ 0.709007] fb0: EFI VGA frame buffer device [ 0.709095] arm-scmi firmware:scmi: failed to setup channel for protocol:0x10 [ 0.709286] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 0.709335] usbcore: registered new interface driver usbhid [ 0.709365] usbhid: USB HID core driver [ 0.709954] hw perfevents: enabled with armv8_pmuv3 PMU driver, 13 counters available [ 0.710283] NET: Registered PF_PACKET protocol family [ 0.711078] registered taskstats version 1 [ 0.711146] Loading compiled-in X.509 certificates [ 0.712565] Demotion targets for Node 0: null [ 0.712839] Btrfs loaded, zoned=no, fsverity=no [ 0.720713] qcom_scm: convention: smc arm 64 [ 0.720770] qcom_scm firmware:scm: qseecom: found qseecom with version 0x1402000 [ 0.720880] qcom_qseecom qcom_qseecom: setting up client for qcom.tz.uefisecapp [ 0.721245] efivars: Registered efivars operations [ 0.722109] arm-smmu 15000000.iommu: probing hardware configuration... [ 0.722146] arm-smmu 15000000.iommu: SMMUv2 with: [ 0.722181] arm-smmu 15000000.iommu: stage 1 translation [ 0.722209] arm-smmu 15000000.iommu: non-coherent table walk [ 0.722240] arm-smmu 15000000.iommu: (IDR0.CTTW overridden by FW configuration) [ 0.722279] arm-smmu 15000000.iommu: stream matching with 117 register groups [ 0.722322] arm-smmu 15000000.iommu: 74 context banks (0 stage-2 only) [ 0.722929] arm-smmu 15000000.iommu: Supported page sizes: 0x61311000 [ 0.722963] arm-smmu 15000000.iommu: Stage-1: 40-bit VA -> 40-bit IPA [ 0.723038] arm-smmu 15000000.iommu: preserved 0 boot mappings [ 0.726041] ------------[ cut here ]------------ [ 0.726066] gcc_usb20_prim_gdsc status stuck at 'off' [ 0.726073] WARNING: CPU: 3 PID: 93 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 0.727080] Modules linked in: [ 0.728064] CPU: 3 UID: 0 PID: 93 Comm: kworker/u49:3 Not tainted 6.11.0-1-x1e-g8844062a2d5e #1 [ 0.729096] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 0.730151] Workqueue: events_unbound deferred_probe_work_func [ 0.731224] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 0.732320] pc : gdsc_toggle_logic+0x144/0x15c [ 0.733421] lr : gdsc_toggle_logic+0x144/0x15c [ 0.734517] sp : ffff8000813639b0 [ 0.735608] x29: ffff8000813639b0 x28: 0000000000000000 x27: 0000000000000000 [ 0.736737] x26: 0000000000000000 x25: ffff6e7040b85040 x24: ffffb40900aff560 [ 0.737878] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 0.739033] x20: 0000000000000001 x19: ffffb40900aff560 x18: fffffffffffe6e50 [ 0.740203] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000004 [ 0.741381] x14: ffffb40900a5e900 x13: 6f27207461206b63 x12: 7574732073757461 [ 0.742564] x11: ffffb40900a5e900 x10: 0000000000000181 x9 : ffffb40900ab6900 [ 0.743736] x8 : 0000000000017fe8 x7 : 00000000fffff180 x6 : ffffb40900ab6900 [ 0.744891] x5 : 0000000000000180 x4 : 40000000fffff180 x3 : 0000000000000000 [ 0.746036] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7040f85500 [ 0.747172] Call trace: [ 0.748293] gdsc_toggle_logic+0x144/0x15c [ 0.749413] gdsc_enable+0x60/0x280 [ 0.750520] _genpd_power_on+0x94/0x180 [ 0.751622] genpd_power_on+0xa8/0x168 [ 0.752720] __genpd_dev_pm_attach+0x124/0x2d0 [ 0.753811] genpd_dev_pm_attach+0x60/0x70 [ 0.754893] dev_pm_domain_attach+0x20/0x34 [ 0.755963] platform_probe+0x50/0xdc [ 0.757017] really_probe+0xc0/0x39c [ 0.757088] Freeing initrd memory: 9588K [ 0.758055] __driver_probe_device+0x7c/0x14c [ 0.760110] driver_probe_device+0x3c/0x120 [ 0.761115] __device_attach_driver+0xbc/0x158 [ 0.762118] bus_for_each_drv+0x88/0xe8 [ 0.763116] __device_attach+0xa0/0x1c0 [ 0.764107] device_initial_probe+0x14/0x20 [ 0.765096] bus_probe_device+0xb0/0xbc [ 0.766082] deferred_probe_work_func+0x9c/0xec [ 0.767061] process_one_work+0x148/0x284 [ 0.768029] worker_thread+0x2cc/0x3e8 [ 0.768978] kthread+0x110/0x114 [ 0.769909] ret_from_fork+0x10/0x20 [ 0.770838] ---[ end trace 0000000000000000 ]--- [ 0.773770] dwc3 a400000.usb: Adding to iommu group 0 [ 0.775147] dwc3 a600000.usb: Adding to iommu group 1 [ 0.777885] dwc3 a800000.usb: Adding to iommu group 2 [ 0.779096] arm-scmi firmware:scmi: failed to setup channel for protocol:0x10 [ 0.779961] geni_se_qup 8c0000.geniqup: Adding to iommu group 3 [ 0.780942] geni_se_qup ac0000.geniqup: Adding to iommu group 4 [ 0.782160] a98000.serial: ttyHS1 at MMIO 0xa98000 (irq = 143, base_baud = 0) is a MSM [ 0.783353] serial serial0: tty port ttyHS1 registered [ 0.784234] geni_se_qup bc0000.geniqup: Adding to iommu group 5 [ 0.786816] ------------[ cut here ]------------ [ 0.787636] gcc_usb20_prim_gdsc status stuck at 'off' [ 0.787642] WARNING: CPU: 8 PID: 93 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 0.789282] Modules linked in: [ 0.790089] CPU: 8 UID: 0 PID: 93 Comm: kworker/u49:3 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 0.790923] Tainted: [W]=WARN [ 0.791730] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 0.792564] Workqueue: events_unbound deferred_probe_work_func [ 0.793419] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 0.794286] pc : gdsc_toggle_logic+0x144/0x15c [ 0.795148] lr : gdsc_toggle_logic+0x144/0x15c [ 0.795995] sp : ffff8000813639b0 [ 0.796835] x29: ffff8000813639b0 x28: 0000000000000000 x27: 0000000000000000 [ 0.797693] x26: 0000000000000000 x25: ffff6e7040b85040 x24: ffffb40900aff560 [ 0.798553] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 0.799409] x20: 0000000000000001 x19: ffffb40900aff560 x18: fffffffffffe7a50 [ 0.800267] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000004 [ 0.801129] x14: ffffb40900a5e900 x13: 6f27207461206b63 x12: 7574732073757461 [ 0.802000] x11: ffffb40900a5e900 x10: 00000000000001b7 x9 : ffffb40900ab6900 [ 0.802874] x8 : 0000000000017fe8 x7 : 00000000fffff1b6 x6 : ffffb40900ab6900 [ 0.803735] x5 : 00000000000001b6 x4 : 40000000fffff1b6 x3 : 0000000000000000 [ 0.804593] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7040f85500 [ 0.805454] Call trace: [ 0.806310] gdsc_toggle_logic+0x144/0x15c [ 0.807173] gdsc_enable+0x60/0x280 [ 0.808028] _genpd_power_on+0x94/0x180 [ 0.808883] genpd_power_on+0xa8/0x168 [ 0.809737] __genpd_dev_pm_attach+0x124/0x2d0 [ 0.810594] genpd_dev_pm_attach+0x60/0x70 [ 0.811454] dev_pm_domain_attach+0x20/0x34 [ 0.812316] platform_probe+0x50/0xdc [ 0.813174] really_probe+0xc0/0x39c [ 0.814028] __driver_probe_device+0x7c/0x14c [ 0.814885] driver_probe_device+0x3c/0x120 [ 0.815742] __device_attach_driver+0xbc/0x158 [ 0.816603] bus_for_each_drv+0x88/0xe8 [ 0.817465] __device_attach+0xa0/0x1c0 [ 0.818324] device_initial_probe+0x14/0x20 [ 0.819183] bus_probe_device+0xb0/0xbc [ 0.820039] deferred_probe_work_func+0x9c/0xec [ 0.820901] process_one_work+0x148/0x284 [ 0.821767] worker_thread+0x2cc/0x3e8 [ 0.822633] kthread+0x110/0x114 [ 0.823492] ret_from_fork+0x10/0x20 [ 0.824345] ---[ end trace 0000000000000000 ]--- [ 0.825376] arm-scmi firmware:scmi: failed to setup channel for protocol:0x10 [ 0.827926] ------------[ cut here ]------------ [ 0.828953] gcc_usb20_prim_gdsc status stuck at 'off' [ 0.828957] WARNING: CPU: 0 PID: 93 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 0.831042] Modules linked in: [ 0.832092] CPU: 0 UID: 0 PID: 93 Comm: kworker/u49:3 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 0.833178] Tainted: [W]=WARN [ 0.834239] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 0.835336] Workqueue: events_unbound deferred_probe_work_func [ 0.836436] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 0.837533] pc : gdsc_toggle_logic+0x144/0x15c [ 0.838608] lr : gdsc_toggle_logic+0x144/0x15c [ 0.839652] sp : ffff8000813639b0 [ 0.840670] x29: ffff8000813639b0 x28: 0000000000000000 x27: 0000000000000000 [ 0.841698] x26: 0000000000000000 x25: ffff6e7040b85040 x24: ffffb40900aff560 [ 0.842712] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 0.843713] x20: 0000000000000001 x19: ffffb40900aff560 x18: fffffffffffe8460 [ 0.844708] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000004 [ 0.845715] x14: ffffb40900a5e900 x13: 6f27207461206b63 x12: 7574732073757461 [ 0.846728] x11: ffffb40900a5e900 x10: 00000000000001e5 x9 : ffffb40900ab6900 [ 0.847738] x8 : 0000000000017fe8 x7 : 00000000fffff1e4 x6 : ffffb40900ab6900 [ 0.848741] x5 : 00000000000001e4 x4 : 40000000fffff1e4 x3 : 0000000000000000 [ 0.849738] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7040f85500 [ 0.850729] Call trace: [ 0.851710] gdsc_toggle_logic+0x144/0x15c [ 0.852689] gdsc_enable+0x60/0x280 [ 0.853660] _genpd_power_on+0x94/0x180 [ 0.854631] genpd_power_on+0xa8/0x168 [ 0.855603] __genpd_dev_pm_attach+0x124/0x2d0 [ 0.856580] genpd_dev_pm_attach+0x60/0x70 [ 0.857543] dev_pm_domain_attach+0x20/0x34 [ 0.858506] platform_probe+0x50/0xdc [ 0.859470] really_probe+0xc0/0x39c [ 0.860432] __driver_probe_device+0x7c/0x14c [ 0.861401] driver_probe_device+0x3c/0x120 [ 0.862369] __device_attach_driver+0xbc/0x158 [ 0.863338] bus_for_each_drv+0x88/0xe8 [ 0.864306] __device_attach+0xa0/0x1c0 [ 0.865271] device_initial_probe+0x14/0x20 [ 0.866240] bus_probe_device+0xb0/0xbc [ 0.867206] deferred_probe_work_func+0x9c/0xec [ 0.868176] process_one_work+0x148/0x284 [ 0.869144] worker_thread+0x2cc/0x3e8 [ 0.870108] kthread+0x110/0x114 [ 0.871067] ret_from_fork+0x10/0x20 [ 0.872026] ---[ end trace 0000000000000000 ]--- [ 0.873199] arm-scmi firmware:scmi: failed to setup channel for protocol:0x10 [ 0.874324] irq: IRQ144: trimming hierarchy from :soc@0:interrupt-controller@b220000-9 [ 0.875372] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 0.876577] clk: Not disabling unused clocks [ 0.877604] PM: genpd: Not disabling unused power domains [ 0.878107] ------------[ cut here ]------------ [ 0.879696] gcc_usb20_prim_gdsc status stuck at 'off' [ 0.879702] WARNING: CPU: 0 PID: 93 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 0.881801] Modules linked in: [ 0.882857] CPU: 0 UID: 0 PID: 93 Comm: kworker/u49:3 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 0.883943] Tainted: [W]=WARN [ 0.884989] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 0.886059] Workqueue: events_unbound deferred_probe_work_func [ 0.887117] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 0.888177] pc : gdsc_toggle_logic+0x144/0x15c [ 0.889217] lr : gdsc_toggle_logic+0x144/0x15c [ 0.890233] sp : ffff8000813639b0 [ 0.891231] x29: ffff8000813639b0 x28: 0000000000000000 x27: 0000000000000000 [ 0.892266] x26: 0000000000000000 x25: ffff6e7040b85040 x24: ffffb40900aff560 [ 0.893306] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 0.894341] x20: 0000000000000001 x19: ffffb40900aff560 x18: fffffffffffe8f80 [ 0.895376] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000004 [ 0.896411] x14: ffffb40900a5e900 x13: 6f27207461206b63 x12: 7574732073757461 [ 0.897448] x11: ffffb40900a5e900 x10: 0000000000000217 x9 : ffffb40900ab6900 [ 0.898485] x8 : 0000000000017fe8 x7 : 00000000fffff216 x6 : ffffb40900ab6900 [ 0.899515] x5 : 0000000000000216 x4 : 40000000fffff216 x3 : 0000000000000000 [ 0.900538] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7040f85500 [ 0.901563] Call trace: [ 0.902585] gdsc_toggle_logic+0x144/0x15c [ 0.903612] gdsc_enable+0x60/0x280 [ 0.904621] _genpd_power_on+0x94/0x180 [ 0.905628] genpd_power_on+0xa8/0x168 [ 0.906636] __genpd_dev_pm_attach+0x124/0x2d0 [ 0.907650] genpd_dev_pm_attach+0x60/0x70 [ 0.908665] dev_pm_domain_attach+0x20/0x34 [ 0.909680] platform_probe+0x50/0xdc [ 0.910691] really_probe+0xc0/0x39c [ 0.911699] __driver_probe_device+0x7c/0x14c [ 0.912711] driver_probe_device+0x3c/0x120 [ 0.913727] __device_attach_driver+0xbc/0x158 [ 0.914744] bus_for_each_drv+0x88/0xe8 [ 0.915758] __device_attach+0xa0/0x1c0 [ 0.916768] device_initial_probe+0x14/0x20 [ 0.917777] bus_probe_device+0xb0/0xbc [ 0.918786] deferred_probe_work_func+0x9c/0xec [ 0.919802] process_one_work+0x148/0x284 [ 0.920817] worker_thread+0x2cc/0x3e8 [ 0.921829] kthread+0x110/0x114 [ 0.922832] ret_from_fork+0x10/0x20 [ 0.923834] ---[ end trace 0000000000000000 ]--- [ 0.925082] arm-scmi firmware:scmi: failed to setup channel for protocol:0x10 [ 0.928099] Freeing unused kernel memory: 2368K [ 0.929173] Run /init as init process [ 0.930198] with arguments: [ 0.930200] /init [ 0.930201] with environment: [ 0.930201] HOME=/ [ 0.930202] TERM=linux [ 1.237775] ------------[ cut here ]------------ [ 1.238649] gcc_usb20_prim_gdsc status stuck at 'off' [ 1.238658] WARNING: CPU: 8 PID: 152 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 1.240430] Modules linked in: typec dispcc_x1e80100 dispcc_sc8280xp [ 1.241341] CPU: 8 UID: 0 PID: 152 Comm: kworker/u51:1 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 1.242262] Tainted: [W]=WARN [ 1.243148] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 1.244056] Workqueue: events_unbound deferred_probe_work_func [ 1.244955] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 1.245853] pc : gdsc_toggle_logic+0x144/0x15c [ 1.246735] lr : gdsc_toggle_logic+0x144/0x15c [ 1.247594] sp : ffff800081bdb9b0 [ 1.248438] x29: ffff800081bdb9b0 x28: 0000000000000000 x27: 0000000000000000 [ 1.249317] x26: 0000000000000000 x25: ffff6e7040e3b700 x24: ffffb40900aff560 [ 1.250198] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 1.251076] x20: 0000000000000001 x19: ffffb40900aff560 x18: fffffffffffe9a78 [ 1.251956] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000004 [ 1.252836] x14: ffffb40900a5e900 x13: 6f27207461206b63 x12: 7574732073757461 [ 1.253716] x11: ffffb40900a5e900 x10: 000000000000024c x9 : ffffb40900ab6900 [ 1.254596] x8 : 0000000000017fe8 x7 : 00000000fffff24b x6 : ffffb40900ab6900 [ 1.255469] x5 : 000000000000024b x4 : 40000000fffff24b x3 : 0000000000000000 [ 1.256337] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7043f28000 [ 1.257207] Call trace: [ 1.258073] gdsc_toggle_logic+0x144/0x15c [ 1.258943] gdsc_enable+0x60/0x280 [ 1.259797] _genpd_power_on+0x94/0x180 [ 1.260650] genpd_power_on+0xa8/0x168 [ 1.261504] __genpd_dev_pm_attach+0x124/0x2d0 [ 1.262364] genpd_dev_pm_attach+0x60/0x70 [ 1.263225] dev_pm_domain_attach+0x20/0x34 [ 1.264087] platform_probe+0x50/0xdc [ 1.264945] really_probe+0xc0/0x39c [ 1.265800] __driver_probe_device+0x7c/0x14c [ 1.266660] driver_probe_device+0x3c/0x120 [ 1.267522] __device_attach_driver+0xbc/0x158 [ 1.268387] bus_for_each_drv+0x88/0xe8 [ 1.269249] __device_attach+0xa0/0x1c0 [ 1.270108] device_initial_probe+0x14/0x20 [ 1.270967] bus_probe_device+0xb0/0xbc [ 1.271826] deferred_probe_work_func+0x9c/0xec [ 1.272691] process_one_work+0x148/0x284 [ 1.273560] worker_thread+0x2cc/0x3e8 [ 1.274422] kthread+0x110/0x114 [ 1.275277] ret_from_fork+0x10/0x20 [ 1.276131] ---[ end trace 0000000000000000 ]--- [ 1.277364] arm-scmi firmware:scmi: failed to setup channel for protocol:0x10 [ 1.280651] arm-smmu 3da0000.iommu: probing hardware configuration... [ 1.281547] arm-smmu 3da0000.iommu: SMMUv2 with: [ 1.282453] arm-smmu 3da0000.iommu: stage 1 translation [ 1.283317] arm-smmu 3da0000.iommu: coherent table walk [ 1.284450] arm-smmu 3da0000.iommu: stream matching with 24 register groups [ 1.285526] arm-smmu 3da0000.iommu: 22 context banks (0 stage-2 only) [ 1.286544] arm-smmu 3da0000.iommu: Supported page sizes: 0x61311000 [ 1.287529] arm-smmu 3da0000.iommu: Stage-1: 48-bit VA -> 40-bit IPA [ 1.288723] arm-smmu 3da0000.iommu: preserved 0 boot mappings [ 1.293222] irq: IRQ172: trimming hierarchy from :soc@0:interrupt-controller@b220000-9 [ 1.293602] ------------[ cut here ]------------ [ 1.294101] i2c_hid_of 0-0010: supply vdd not found, using dummy regulator [ 1.295036] gcc_usb20_prim_gdsc status stuck at 'off' [ 1.295906] i2c_hid_of 0-0010: supply vddl not found, using dummy regulator [ 1.296440] WARNING: CPU: 0 PID: 152 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 1.296720] irq: IRQ175: trimming hierarchy from :soc@0:interrupt-controller@b220000-9 [ 1.297661] Modules linked in: [ 1.298511] irq: IRQ176: trimming hierarchy from :soc@0:interrupt-controller@b220000-9 [ 1.298541] i2c_hid_of 1-0015: supply vdd not found, using dummy regulator [ 1.298566] i2c_hid_of 1-0015: supply vddl not found, using dummy regulator [ 1.299477] i2c_qcom_geni(+) [ 1.300363] i2c_hid_of 1-003a: supply vdd not found, using dummy regulator [ 1.301348] i2c_hid_of [ 1.302259] i2c_hid_of 1-003a: supply vddl not found, using dummy regulator [ 1.303257] i2c_hid drm i2c_core gpucc_x1e80100 gpucc_sc8280xp gpio_sbu_mux typec dispcc_x1e80100 dispcc_sc8280xp [ 1.308298] CPU: 0 UID: 0 PID: 152 Comm: kworker/u51:1 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 1.309404] Tainted: [W]=WARN [ 1.310495] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 1.311632] Workqueue: events_unbound deferred_probe_work_func [ 1.312769] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 1.313920] pc : gdsc_toggle_logic+0x144/0x15c [ 1.315073] lr : gdsc_toggle_logic+0x144/0x15c [ 1.316217] sp : ffff800081bdb9b0 [ 1.317357] x29: ffff800081bdb9b0 x28: 0000000000000000 x27: 0000000000000000 [ 1.318522] x26: 0000000000000000 x25: ffff6e7040e3b700 x24: ffffb40900aff560 [ 1.319692] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 1.320863] x20: 0000000000000001 x19: ffffb40900aff560 x18: fffffffffffea7a8 [ 1.322040] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000004 [ 1.323223] x14: 00007e7ded97a90e x13: 00000000fa83b2da x12: 0000000000000000 [ 1.324402] x11: 0000000000000001 x10: fb9e8f3e10ec3f1f x9 : b144bab7f573ab4f [ 1.325589] x8 : ffff6e7043f290c8 x7 : 000000000000b67e x6 : 000000000000b6fc [ 1.326784] x5 : 00000000510f0010 x4 : 0000000000f0000f x3 : 0000000000c0000e [ 1.327977] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7043f28000 [ 1.329170] Call trace: [ 1.330357] gdsc_toggle_logic+0x144/0x15c [ 1.331548] gdsc_enable+0x60/0x280 [ 1.332732] _genpd_power_on+0x94/0x180 [ 1.333913] genpd_power_on+0xa8/0x168 [ 1.335094] __genpd_dev_pm_attach+0x124/0x2d0 [ 1.336282] genpd_dev_pm_attach+0x60/0x70 [ 1.337472] dev_pm_domain_attach+0x20/0x34 [ 1.338663] platform_probe+0x50/0xdc [ 1.339836] really_probe+0xc0/0x39c [ 1.340995] __driver_probe_device+0x7c/0x14c [ 1.342158] driver_probe_device+0x3c/0x120 [ 1.343326] __device_attach_driver+0xbc/0x158 [ 1.344501] bus_for_each_drv+0x88/0xe8 [ 1.345672] __device_attach+0xa0/0x1c0 [ 1.346838] device_initial_probe+0x14/0x20 [ 1.348005] bus_probe_device+0xb0/0xbc [ 1.349169] deferred_probe_work_func+0x9c/0xec [ 1.350339] process_one_work+0x148/0x284 [ 1.351494] worker_thread+0x2cc/0x3e8 [ 1.352626] kthread+0x110/0x114 [ 1.353740] ret_from_fork+0x10/0x20 [ 1.354840] ---[ end trace 0000000000000000 ]--- [ 1.356740] arm-scmi firmware:scmi: failed to setup channel for protocol:0x10 [ 1.359432] ------------[ cut here ]------------ [ 1.360548] gcc_usb20_prim_gdsc status stuck at 'off' [ 1.360552] WARNING: CPU: 0 PID: 152 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 1.362708] Modules linked in: i2c_qcom_geni i2c_hid_of i2c_hid drm i2c_core gpucc_x1e80100 gpucc_sc8280xp gpio_sbu_mux typec dispcc_x1e80100 dispcc_sc8280xp [ 1.363872] CPU: 0 UID: 0 PID: 152 Comm: kworker/u51:1 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 1.365042] Tainted: [W]=WARN [ 1.366183] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 1.367355] Workqueue: events_unbound deferred_probe_work_func [ 1.368525] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 1.369701] pc : gdsc_toggle_logic+0x144/0x15c [ 1.370849] lr : gdsc_toggle_logic+0x144/0x15c [ 1.371958] sp : ffff800081bdb9b0 [ 1.373039] x29: ffff800081bdb9b0 x28: 0000000000000000 x27: 0000000000000000 [ 1.374129] x26: 0000000000000000 x25: ffff6e7040e3b700 x24: ffffb40900aff560 [ 1.375206] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 1.376270] x20: 0000000000000001 x19: ffffb40900aff560 x18: fffffffffffeb4a0 [ 1.377328] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000004 [ 1.378399] x14: ffffb40900a5e900 x13: 6f27207461206b63 x12: 7574732073757461 [ 1.379476] x11: ffffb40900a5e900 x10: 00000000000002bd x9 : ffffb40900ab6900 [ 1.380550] x8 : 0000000000017fe8 x7 : 00000000fffff2bc x6 : ffffb40900ab6900 [ 1.381618] x5 : 00000000000002bc x4 : 40000000fffff2bc x3 : 0000000000000000 [ 1.382681] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7043f28000 [ 1.383737] Call trace: [ 1.384784] gdsc_toggle_logic+0x144/0x15c [ 1.385836] gdsc_enable+0x60/0x280 [ 1.386875] _genpd_power_on+0x94/0x180 [ 1.387903] genpd_power_on+0xa8/0x168 [ 1.388930] __genpd_dev_pm_attach+0x124/0x2d0 [ 1.389964] genpd_dev_pm_attach+0x60/0x70 [ 1.390984] dev_pm_domain_attach+0x20/0x34 [ 1.392002] platform_probe+0x50/0xdc [ 1.393022] really_probe+0xc0/0x39c [ 1.394040] __driver_probe_device+0x7c/0x14c [ 1.395064] driver_probe_device+0x3c/0x120 [ 1.396087] __device_attach_driver+0xbc/0x158 [ 1.397112] bus_for_each_drv+0x88/0xe8 [ 1.398135] __device_attach+0xa0/0x1c0 [ 1.399156] device_initial_probe+0x14/0x20 [ 1.400180] bus_probe_device+0xb0/0xbc [ 1.401201] deferred_probe_work_func+0x9c/0xec [ 1.402227] process_one_work+0x148/0x284 [ 1.403250] worker_thread+0x2cc/0x3e8 [ 1.404269] kthread+0x110/0x114 [ 1.405284] ret_from_fork+0x10/0x20 [ 1.406298] ---[ end trace 0000000000000000 ]--- [ 1.407636] arm-scmi firmware:scmi: failed to setup channel for protocol:0x10 [ 1.410217] ------------[ cut here ]------------ [ 1.411260] gcc_usb20_prim_gdsc status stuck at 'off' [ 1.411263] WARNING: CPU: 0 PID: 152 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 1.413409] Modules linked in: i2c_qcom_geni i2c_hid_of i2c_hid drm i2c_core gpucc_x1e80100 gpucc_sc8280xp gpio_sbu_mux typec dispcc_x1e80100 dispcc_sc8280xp [ 1.414591] CPU: 0 UID: 0 PID: 152 Comm: kworker/u51:1 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 1.415787] Tainted: [W]=WARN [ 1.416953] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 1.418150] Workqueue: events_unbound deferred_probe_work_func [ 1.419349] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 1.420544] pc : gdsc_toggle_logic+0x144/0x15c [ 1.421694] lr : gdsc_toggle_logic+0x144/0x15c [ 1.422787] sp : ffff800081bdb9b0 [ 1.423854] x29: ffff800081bdb9b0 x28: 0000000000000000 x27: 0000000000000000 [ 1.424930] x26: 0000000000000000 x25: ffff6e7040e3b700 x24: ffffb40900aff560 [ 1.425993] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 1.427044] x20: 0000000000000001 x19: ffffb40900aff560 x18: fffffffffffebf38 [ 1.428091] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000004 [ 1.429148] x14: ffffb40900a5e900 x13: 6f27207461206b63 x12: 7574732073757461 [ 1.430211] x11: ffffb40900a5e900 x10: 00000000000002eb x9 : ffffb40900ab6900 [ 1.431272] x8 : 0000000000017fe8 x7 : 00000000fffff2ea x6 : ffffb40900ab6900 [ 1.432325] x5 : 00000000000002ea x4 : 40000000fffff2ea x3 : 0000000000000000 [ 1.433374] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7043f28000 [ 1.434416] Call trace: [ 1.435449] gdsc_toggle_logic+0x144/0x15c [ 1.436480] gdsc_enable+0x60/0x280 [ 1.437502] _genpd_power_on+0x94/0x180 [ 1.438524] genpd_power_on+0xa8/0x168 [ 1.439548] __genpd_dev_pm_attach+0x124/0x2d0 [ 1.440576] genpd_dev_pm_attach+0x60/0x70 [ 1.441591] dev_pm_domain_attach+0x20/0x34 [ 1.442606] platform_probe+0x50/0xdc [ 1.443622] really_probe+0xc0/0x39c [ 1.444636] __driver_probe_device+0x7c/0x14c [ 1.445657] driver_probe_device+0x3c/0x120 [ 1.446677] __device_attach_driver+0xbc/0x158 [ 1.447698] bus_for_each_drv+0x88/0xe8 [ 1.448718] __device_attach+0xa0/0x1c0 [ 1.449736] device_initial_probe+0x14/0x20 [ 1.450757] bus_probe_device+0xb0/0xbc [ 1.451776] deferred_probe_work_func+0x9c/0xec [ 1.452799] process_one_work+0x148/0x284 [ 1.453820] worker_thread+0x2cc/0x3e8 [ 1.454838] kthread+0x110/0x114 [ 1.455851] ret_from_fork+0x10/0x20 [ 1.456864] ---[ end trace 0000000000000000 ]--- [ 1.482695] input: hid-over-i2c 04F3:3195 Mouse as /devices/platform/soc@0/bc0000.geniqup/b80000.i2c/i2c-1/1-0015/0018:04F3:3195.0001/input/input1 [ 1.483919] input: hid-over-i2c 04F3:3195 Touchpad as /devices/platform/soc@0/bc0000.geniqup/b80000.i2c/i2c-1/1-0015/0018:04F3:3195.0001/input/input3 [ 1.485053] hid-generic 0018:04F3:3195.0001: input: I2C HID v1.00 Mouse [hid-over-i2c 04F3:3195] on 1-0015 [ 1.486535] arm-scmi firmware:scmi: failed to setup channel for protocol:0x10 [ 1.489120] ------------[ cut here ]------------ [ 1.489825] input: hid-over-i2c 04F3:000D Keyboard as /devices/platform/soc@0/bc0000.geniqup/b80000.i2c/i2c-1/1-003a/0018:04F3:000D.0002/input/input4 [ 1.490148] gcc_usb20_prim_gdsc status stuck at 'off' [ 1.491261] WARNING: CPU: 9 PID: 79 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 1.493479] Modules linked in: hid_multitouch(+) i2c_qcom_geni i2c_hid_of i2c_hid drm i2c_core gpucc_x1e80100 gpucc_sc8280xp gpio_sbu_mux typec dispcc_x1e80100 dispcc_sc8280xp [ 1.495835] CPU: 9 UID: 0 PID: 79 Comm: kworker/u51:0 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 1.497005] Tainted: [W]=WARN [ 1.498121] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 1.499258] Workqueue: events_unbound deferred_probe_work_func [ 1.500389] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 1.501518] pc : gdsc_toggle_logic+0x144/0x15c [ 1.502635] lr : gdsc_toggle_logic+0x144/0x15c [ 1.503731] sp : ffff8000803739b0 [ 1.504832] x29: ffff8000803739b0 x28: 0000000000000000 x27: 0000000000000000 [ 1.505956] x26: ffff6e7040019c28 x25: ffff6e7040c13580 x24: ffffb40900aff560 [ 1.507078] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 1.508196] x20: 0000000000000001 x19: ffffb40900aff560 x18: fffffffffffecc00 [ 1.509318] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000004 [ 1.510436] x14: ffffb40900a5e900 x13: 6f27207461206b63 x12: 7574732073757461 [ 1.511558] x11: ffffb40900a5e900 x10: 000000000000031d x9 : ffffb40900ab6900 [ 1.512677] x8 : 0000000000017fe8 x7 : 00000000fffff31c x6 : ffffb40900ab6900 [ 1.513792] x5 : 000000000000031c x4 : 40000000fffff31c x3 : 0000000000000000 [ 1.514906] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7040b3d500 [ 1.516023] Call trace: [ 1.517135] gdsc_toggle_logic+0x144/0x15c [ 1.518241] gdsc_enable+0x60/0x280 [ 1.519340] _genpd_power_on+0x94/0x180 [ 1.520442] genpd_power_on+0xa8/0x168 [ 1.521542] __genpd_dev_pm_attach+0x124/0x2d0 [ 1.522648] genpd_dev_pm_attach+0x60/0x70 [ 1.523754] dev_pm_domain_attach+0x20/0x34 [ 1.524859] platform_probe+0x50/0xdc [ 1.525961] really_probe+0xc0/0x39c [ 1.527060] __driver_probe_device+0x7c/0x14c [ 1.528166] driver_probe_device+0x3c/0x120 [ 1.529271] __device_attach_driver+0xbc/0x158 [ 1.530378] bus_for_each_drv+0x88/0xe8 [ 1.531483] __device_attach+0xa0/0x1c0 [ 1.532586] device_initial_probe+0x14/0x20 [ 1.533690] bus_probe_device+0xb0/0xbc [ 1.534794] deferred_probe_work_func+0x9c/0xec [ 1.535903] process_one_work+0x148/0x284 [ 1.537013] worker_thread+0x2cc/0x3e8 [ 1.538116] kthread+0x110/0x114 [ 1.539214] ret_from_fork+0x10/0x20 [ 1.540314] ---[ end trace 0000000000000000 ]--- [ 1.548332] input: hid-over-i2c 04F3:000D Mouse as /devices/platform/soc@0/bc0000.geniqup/b80000.i2c/i2c-1/1-003a/0018:04F3:000D.0002/input/input5 [ 1.593310] hid-generic 0018:04F3:000D.0002: input: I2C HID v1.00 Keyboard [hid-over-i2c 04F3:000D] on 1-003a [ 1.594997] arm-scmi firmware:scmi: failed to setup channel for protocol:0x10 [ 1.597734] ------------[ cut here ]------------ [ 1.598846] gcc_usb20_prim_gdsc status stuck at 'off' [ 1.598856] WARNING: CPU: 11 PID: 182 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 1.601079] Modules linked in: led_class hid_multitouch(+) i2c_qcom_geni i2c_hid_of i2c_hid drm i2c_core gpucc_x1e80100 gpucc_sc8280xp gpio_sbu_mux typec dispcc_x1e80100 dispcc_sc8280xp [ 1.603351] CPU: 11 UID: 0 PID: 182 Comm: kworker/u51:3 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 1.604492] Tainted: [W]=WARN [ 1.605495] input: hid-over-i2c 04F3:3195 Mouse as /devices/platform/soc@0/bc0000.geniqup/b80000.i2c/i2c-1/1-0015/0018:04F3:3195.0001/input/input6 [ 1.605574] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 1.605577] Workqueue: events_unbound deferred_probe_work_func [ 1.606923] input: hid-over-i2c 04F3:3195 Touchpad as /devices/platform/soc@0/bc0000.geniqup/b80000.i2c/i2c-1/1-0015/0018:04F3:3195.0001/input/input8 [ 1.607852] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 1.607854] pc : gdsc_toggle_logic+0x144/0x15c [ 1.607856] lr : gdsc_toggle_logic+0x144/0x15c [ 1.607857] sp : ffff80008173b9b0 [ 1.607858] x29: ffff80008173b9b0 x28: 0000000000000000 x27: 0000000000000000 [ 1.607860] x26: ffff6e7040019c28 x25: ffff6e7045afd040 x24: ffffb40900aff560 [ 1.607862] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 1.607864] x20: 0000000000000001 x19: ffffb40900aff560 x18: fffffffffffed7a8 [ 1.607865] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000004 [ 1.609105] hid-multitouch 0018:04F3:3195.0001: input: I2C HID v1.00 Mouse [hid-over-i2c 04F3:3195] on 1-0015 [ 1.610152] x14: ffffb40900a5e900 x13: 6f27207461206b63 x12: 7574732073757461 [ 1.623879] x11: ffffb40900a5e900 x10: 000000000000034d x9 : ffffb40900ab6900 [ 1.625060] x8 : 0000000000017fe8 x7 : 00000000fffff34c x6 : ffffb40900ab6900 [ 1.626242] x5 : 000000000000034c x4 : 40000000fffff34c x3 : 0000000000000000 [ 1.627421] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7043d44400 [ 1.628589] Call trace: [ 1.629751] gdsc_toggle_logic+0x144/0x15c [ 1.630920] gdsc_enable+0x60/0x280 [ 1.632085] _genpd_power_on+0x94/0x180 [ 1.633252] genpd_power_on+0xa8/0x168 [ 1.634417] __genpd_dev_pm_attach+0x124/0x2d0 [ 1.635585] genpd_dev_pm_attach+0x60/0x70 [ 1.636753] dev_pm_domain_attach+0x20/0x34 [ 1.637922] platform_probe+0x50/0xdc [ 1.639090] really_probe+0xc0/0x39c [ 1.640255] __driver_probe_device+0x7c/0x14c [ 1.641424] driver_probe_device+0x3c/0x120 [ 1.642591] __device_attach_driver+0xbc/0x158 [ 1.643761] bus_for_each_drv+0x88/0xe8 [ 1.644930] __device_attach+0xa0/0x1c0 [ 1.646098] device_initial_probe+0x14/0x20 [ 1.647267] bus_probe_device+0xb0/0xbc [ 1.648433] deferred_probe_work_func+0x9c/0xec [ 1.649602] process_one_work+0x148/0x284 [ 1.650775] worker_thread+0x2cc/0x3e8 [ 1.651946] kthread+0x110/0x114 [ 1.653116] ret_from_fork+0x10/0x20 [ 1.654282] ---[ end trace 0000000000000000 ]--- [ 1.655690] arm-scmi firmware:scmi: failed to setup channel for protocol:0x10 [ 1.658353] ------------[ cut here ]------------ [ 1.659455] gcc_usb20_prim_gdsc status stuck at 'off' [ 1.659458] WARNING: CPU: 11 PID: 182 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 1.661681] Modules linked in: leds_qcom_lpg led_class_multicolor led_class hid_multitouch i2c_qcom_geni i2c_hid_of i2c_hid drm i2c_core gpucc_x1e80100 gpucc_sc8280xp gpio_sbu_mux typec dispcc_x1e80100 dispcc_sc8280xp [ 1.664007] CPU: 11 UID: 0 PID: 182 Comm: kworker/u51:3 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 1.665144] Tainted: [W]=WARN [ 1.666244] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 1.667364] Workqueue: events_unbound deferred_probe_work_func [ 1.668455] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 1.669524] pc : gdsc_toggle_logic+0x144/0x15c [ 1.670578] lr : gdsc_toggle_logic+0x144/0x15c [ 1.671584] sp : ffff80008173b9b0 [ 1.672547] x29: ffff80008173b9b0 x28: 0000000000000000 x27: 0000000000000000 [ 1.673524] x26: ffff6e7040019c28 x25: ffff6e7045afd040 x24: ffffb40900aff560 [ 1.674496] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 1.675479] x20: 0000000000000001 x19: ffffb40900aff560 x18: fffffffffffee410 [ 1.676468] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000004 [ 1.677454] x14: ffffb40900a5e900 x13: 6f27207461206b63 x12: 7574732073757461 [ 1.678442] x11: ffffb40900a5e900 x10: 000000000000037f x9 : ffffb40900ab6900 [ 1.679432] x8 : 0000000000017fe8 x7 : 00000000fffff37e x6 : ffffb40900ab6900 [ 1.680416] x5 : 000000000000037e x4 : 40000000fffff37e x3 : 0000000000000000 [ 1.681396] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7043d44400 [ 1.682355] Call trace: [ 1.683284] gdsc_toggle_logic+0x144/0x15c [ 1.684215] gdsc_enable+0x60/0x280 [ 1.685141] _genpd_power_on+0x94/0x180 [ 1.686070] genpd_power_on+0xa8/0x168 [ 1.686997] __genpd_dev_pm_attach+0x124/0x2d0 [ 1.687917] genpd_dev_pm_attach+0x60/0x70 [ 1.688835] dev_pm_domain_attach+0x20/0x34 [ 1.689755] platform_probe+0x50/0xdc [ 1.690675] really_probe+0xc0/0x39c [ 1.691594] __driver_probe_device+0x7c/0x14c [ 1.692516] driver_probe_device+0x3c/0x120 [ 1.693437] __device_attach_driver+0xbc/0x158 [ 1.694361] bus_for_each_drv+0x88/0xe8 [ 1.695283] __device_attach+0xa0/0x1c0 [ 1.696206] device_initial_probe+0x14/0x20 [ 1.697128] bus_probe_device+0xb0/0xbc [ 1.698047] deferred_probe_work_func+0x9c/0xec [ 1.698969] process_one_work+0x148/0x284 [ 1.699892] worker_thread+0x2cc/0x3e8 [ 1.700812] kthread+0x110/0x114 [ 1.701729] ret_from_fork+0x10/0x20 [ 1.702644] ---[ end trace 0000000000000000 ]--- [ 1.708272] arm-scmi firmware:scmi: failed to setup channel for protocol:0x10 [ 1.710811] ------------[ cut here ]------------ [ 1.711769] gcc_usb20_prim_gdsc status stuck at 'off' [ 1.711780] WARNING: CPU: 1 PID: 93 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 1.713730] Modules linked in: mdt_loader drm_exec llcc_qcom gpu_sched drm_display_helper drm_dp_aux_bus drm_kms_helper leds_qcom_lpg led_class_multicolor led_class hid_multitouch i2c_qcom_geni i2c_hid_of i2c_hid drm i2c_core gpucc_x1e80100 gpucc_sc8280xp gpio_sbu_mux typec dispcc_x1e80100 dispcc_sc8280xp [ 1.715893] CPU: 1 UID: 0 PID: 93 Comm: kworker/u49:3 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 1.716992] Tainted: [W]=WARN [ 1.718070] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 1.719169] Workqueue: events_unbound deferred_probe_work_func [ 1.720235] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 1.721268] pc : gdsc_toggle_logic+0x144/0x15c [ 1.722278] lr : gdsc_toggle_logic+0x144/0x15c [ 1.723258] sp : ffff8000813639b0 [ 1.724218] x29: ffff8000813639b0 x28: 0000000000000000 x27: 0000000000000000 [ 1.725186] x26: 0000000000000000 x25: ffff6e7040b85040 x24: ffffb40900aff560 [ 1.726145] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 1.727095] x20: 0000000000000001 x19: ffffb40900aff560 x18: fffffffffffeeee8 [ 1.728060] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000004 [ 1.729026] x14: ffffb40900a5e900 x13: 6f27207461206b63 x12: 7574732073757461 [ 1.729993] x11: ffffb40900a5e900 x10: 00000000000003ad x9 : ffffb40900ab6900 [ 1.730957] x8 : 0000000000017fe8 x7 : 00000000fffff3ac x6 : ffffb40900ab6900 [ 1.731920] x5 : 00000000000003ac x4 : 40000000fffff3ac x3 : 0000000000000000 [ 1.732874] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7040f85500 [ 1.733827] Call trace: [ 1.734768] gdsc_toggle_logic+0x144/0x15c [ 1.735712] gdsc_enable+0x60/0x280 [ 1.736651] _genpd_power_on+0x94/0x180 [ 1.737593] genpd_power_on+0xa8/0x168 [ 1.738533] __genpd_dev_pm_attach+0x124/0x2d0 [ 1.739465] genpd_dev_pm_attach+0x60/0x70 [ 1.740397] dev_pm_domain_attach+0x20/0x34 [ 1.741334] platform_probe+0x50/0xdc [ 1.742268] really_probe+0xc0/0x39c [ 1.743201] __driver_probe_device+0x7c/0x14c [ 1.744138] driver_probe_device+0x3c/0x120 [ 1.745075] __device_attach_driver+0xbc/0x158 [ 1.746015] bus_for_each_drv+0x88/0xe8 [ 1.746952] __device_attach+0xa0/0x1c0 [ 1.747890] device_initial_probe+0x14/0x20 [ 1.748828] bus_probe_device+0xb0/0xbc [ 1.749763] deferred_probe_work_func+0x9c/0xec [ 1.750701] process_one_work+0x148/0x284 [ 1.751641] worker_thread+0x2cc/0x3e8 [ 1.752577] kthread+0x110/0x114 [ 1.753509] ret_from_fork+0x10/0x20 [ 1.754439] ---[ end trace 0000000000000000 ]--- [ 1.760600] adreno 3d00000.gpu: Adding to iommu group 6 [ 1.763236] msm-mdss ae00000.display-subsystem: Adding to iommu group 7 [ 1.764403] arm-scmi firmware:scmi: failed to setup channel for protocol:0x10 [ 1.766903] ------------[ cut here ]------------ [ 1.767885] gcc_usb20_prim_gdsc status stuck at 'off' [ 1.767889] WARNING: CPU: 1 PID: 93 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 1.769871] Modules linked in: msm(+) mdt_loader drm_exec llcc_qcom gpu_sched drm_display_helper drm_dp_aux_bus drm_kms_helper leds_qcom_lpg led_class_multicolor led_class hid_multitouch i2c_qcom_geni i2c_hid_of i2c_hid drm i2c_core gpucc_x1e80100 gpucc_sc8280xp gpio_sbu_mux typec dispcc_x1e80100 dispcc_sc8280xp [ 1.772044] CPU: 1 UID: 0 PID: 93 Comm: kworker/u49:3 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 1.773146] Tainted: [W]=WARN [ 1.774189] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 1.775223] Workqueue: events_unbound deferred_probe_work_func [ 1.776228] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 1.777230] pc : gdsc_toggle_logic+0x144/0x15c [ 1.778217] lr : gdsc_toggle_logic+0x144/0x15c [ 1.779178] sp : ffff8000813639b0 [ 1.780121] x29: ffff8000813639b0 x28: 0000000000000000 x27: 0000000000000000 [ 1.781077] x26: 0000000000000000 x25: ffff6e7040b85040 x24: ffffb40900aff560 [ 1.782048] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 1.783020] x20: 0000000000000001 x19: ffffb40900aff560 x18: fffffffffffefa90 [ 1.783992] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000004 [ 1.784961] x14: ffffb40900a5e900 x13: 6f27207461206b63 x12: 7574732073757461 [ 1.785934] x11: ffffb40900a5e900 x10: 00000000000003dd x9 : ffffb40900ab6900 [ 1.786903] x8 : 0000000000017fe8 x7 : 00000000fffff3dc x6 : ffffb40900ab6900 [ 1.787870] x5 : 00000000000003dc x4 : 40000000fffff3dc x3 : 0000000000000000 [ 1.788828] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7040f85500 [ 1.789784] Call trace: [ 1.790735] gdsc_toggle_logic+0x144/0x15c [ 1.791693] gdsc_enable+0x60/0x280 [ 1.792646] _genpd_power_on+0x94/0x180 [ 1.793588] genpd_power_on+0xa8/0x168 [ 1.794527] __genpd_dev_pm_attach+0x124/0x2d0 [ 1.795474] genpd_dev_pm_attach+0x60/0x70 [ 1.796059] disp_cc_pll0 PLL is already enabled [ 1.796421] dev_pm_domain_attach+0x20/0x34 [ 1.798331] platform_probe+0x50/0xdc [ 1.799281] really_probe+0xc0/0x39c [ 1.800226] __driver_probe_device+0x7c/0x14c [ 1.801177] driver_probe_device+0x3c/0x120 [ 1.802130] __device_attach_driver+0xbc/0x158 [ 1.803085] bus_for_each_drv+0x88/0xe8 [ 1.804037] __device_attach+0xa0/0x1c0 [ 1.804986] device_initial_probe+0x14/0x20 [ 1.805934] bus_probe_device+0xb0/0xbc [ 1.806883] deferred_probe_work_func+0x9c/0xec [ 1.807839] process_one_work+0x148/0x284 [ 1.808793] worker_thread+0x2cc/0x3e8 [ 1.809744] kthread+0x110/0x114 [ 1.810687] ret_from_fork+0x10/0x20 [ 1.811630] ---[ end trace 0000000000000000 ]--- [ 1.812903] arm-scmi firmware:scmi: failed to setup channel for protocol:0x10 [ 1.816109] ------------[ cut here ]------------ [ 1.817086] gcc_usb20_prim_gdsc status stuck at 'off' [ 1.817090] WARNING: CPU: 1 PID: 93 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 1.819073] Modules linked in: nvme nvme_core msm mdt_loader drm_exec llcc_qcom gpu_sched drm_display_helper drm_dp_aux_bus drm_kms_helper leds_qcom_lpg led_class_multicolor led_class hid_multitouch i2c_qcom_geni i2c_hid_of i2c_hid drm i2c_core gpucc_x1e80100 gpucc_sc8280xp gpio_sbu_mux typec dispcc_x1e80100 dispcc_sc8280xp [ 1.821251] CPU: 1 UID: 0 PID: 93 Comm: kworker/u49:3 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 1.822367] Tainted: [W]=WARN [ 1.823450] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 1.824528] Workqueue: events_unbound deferred_probe_work_func [ 1.825568] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 1.826584] pc : gdsc_toggle_logic+0x144/0x15c [ 1.827582] lr : gdsc_toggle_logic+0x144/0x15c [ 1.828555] sp : ffff8000813639b0 [ 1.829507] x29: ffff8000813639b0 x28: 0000000000000000 x27: 0000000000000000 [ 1.830470] x26: 0000000000000000 x25: ffff6e7040b85040 x24: ffffb40900aff560 [ 1.831427] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 1.832396] x20: 0000000000000001 x19: ffffb40900aff560 x18: ffffffffffff05f0 [ 1.833369] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000004 [ 1.834338] x14: ffffb40900a5e900 x13: 6f27207461206b63 x12: 7574732073757461 [ 1.835308] x11: ffffb40900a5e900 x10: 000000000000040c x9 : ffffb40900ab6900 [ 1.836278] x8 : 0000000000017fe8 x7 : 00000000fffff40b x6 : ffffb40900ab6900 [ 1.837243] x5 : 000000000000040b x4 : 40000000fffff40b x3 : 0000000000000000 [ 1.838202] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7040f85500 [ 1.839155] Call trace: [ 1.840101] gdsc_toggle_logic+0x144/0x15c [ 1.841052] gdsc_enable+0x60/0x280 [ 1.842000] _genpd_power_on+0x94/0x180 [ 1.842948] genpd_power_on+0xa8/0x168 [ 1.843884] __genpd_dev_pm_attach+0x124/0x2d0 [ 1.844822] genpd_dev_pm_attach+0x60/0x70 [ 1.845762] dev_pm_domain_attach+0x20/0x34 [ 1.846704] platform_probe+0x50/0xdc [ 1.847645] really_probe+0xc0/0x39c [ 1.848583] __driver_probe_device+0x7c/0x14c [ 1.849524] driver_probe_device+0x3c/0x120 [ 1.850464] __device_attach_driver+0xbc/0x158 [ 1.851404] bus_for_each_drv+0x88/0xe8 [ 1.852342] __device_attach+0xa0/0x1c0 [ 1.853282] device_initial_probe+0x14/0x20 [ 1.854220] bus_probe_device+0xb0/0xbc [ 1.855156] deferred_probe_work_func+0x9c/0xec [ 1.856095] process_one_work+0x148/0x284 [ 1.857033] worker_thread+0x2cc/0x3e8 [ 1.857970] kthread+0x110/0x114 [ 1.858903] ret_from_fork+0x10/0x20 [ 1.859834] ---[ end trace 0000000000000000 ]--- [ 1.864937] arm-scmi firmware:scmi: failed to setup channel for protocol:0x10 [ 1.866254] qcom-eusb2-repeater c432000.spmi:pmic@7:phy@fd00: Registered Qcom-eUSB2 repeater [ 1.867330] qcom-eusb2-repeater c432000.spmi:pmic@a:phy@fd00: Registered Qcom-eUSB2 repeater [ 1.878649] NET: Registered PF_QIPCRTR protocol family [ 1.886484] remoteproc remoteproc0: 30000000.remoteproc is available [ 1.887549] remoteproc remoteproc0: Direct firmware load for qcom/x1e80100/LENOVO/21N1/qcadsp8380.mbn failed with error -2 [ 1.888582] remoteproc remoteproc0: powering up 30000000.remoteproc [ 1.889607] remoteproc remoteproc0: Direct firmware load for qcom/x1e80100/LENOVO/21N1/qcadsp8380.mbn failed with error -2 [ 1.890650] remoteproc remoteproc0: request_firmware failed: -2 [ 1.892276] remoteproc remoteproc1: 32300000.remoteproc is available [ 1.895718] remoteproc remoteproc1: Direct firmware load for qcom/x1e80100/LENOVO/21N1/qccdsp8380.mbn failed with error -2 [ 1.896716] remoteproc remoteproc1: powering up 32300000.remoteproc [ 1.897662] remoteproc remoteproc1: Direct firmware load for qcom/x1e80100/LENOVO/21N1/qccdsp8380.mbn failed with error -2 [ 1.898613] remoteproc remoteproc1: request_firmware failed: -2 [ 1.899660] usbcore: registered new device driver r8152-cfgselector [ 1.900595] usbcore: registered new interface driver r8152 [ 1.903475] usbcore: registered new interface driver usb-storage [ 1.962707] synth uevent: /devices/platform/pmic-glink/pmic_glink.power-supply.0/power_supply/qcom-battmgr-ac: failed to send uevent [ 1.963701] power_supply qcom-battmgr-ac: uevent: failed to send synthetic uevent: -11 [ 1.966846] synth uevent: /devices/platform/pmic-glink/pmic_glink.power-supply.0/power_supply/qcom-battmgr-bat: failed to send uevent [ 1.967994] power_supply qcom-battmgr-bat: uevent: failed to send synthetic uevent: -11 [ 1.971612] synth uevent: /devices/platform/pmic-glink/pmic_glink.power-supply.0/power_supply/qcom-battmgr-usb: failed to send uevent [ 1.972932] power_supply qcom-battmgr-usb: uevent: failed to send synthetic uevent: -11 [ 1.977083] synth uevent: /devices/platform/pmic-glink/pmic_glink.power-supply.0/power_supply/qcom-battmgr-wls: failed to send uevent [ 1.978571] power_supply qcom-battmgr-wls: uevent: failed to send synthetic uevent: -11 [ 1.994684] panel-simple-dp-aux aux-aea0000.displayport-controller: Detected BOE NE140WUM-N6G (0x0b66) [ 1.999586] ------------[ cut here ]------------ [ 2.001262] gcc_usb20_prim_gdsc status stuck at 'off' [ 2.001278] WARNING: CPU: 0 PID: 93 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 2.004675] Modules linked in: usb_storage ufs_qcom tcsrcc_x1e80100 r8152 mii libphy qcom_q6v5_pas qcom_q6v5_adsp qcom_pil_info qcom_common qcom_glink_smem qcom_glink qcom_q6v5 qcom_sysmon qcom_pd_mapper pwm_bl pmic_glink_altmode qcom_battmgr aux_hpd_bridge qrtr pmic_glink rpmsg_core pdr_interface qcom_pdr_msg qmi_helpers phy_qcom_snps_eusb2 phy_qcom_qmp_usbc phy_qcom_qmp_usb phy_qcom_qmp_ufs phy_qcom_qmp_pcie phy_qcom_qmp_combo aux_bridge phy_qcom_eusb2_repeater phy_qcom_edp pcie_qcom crc8 panel_edp overlay nvme nvme_core msm mdt_loader drm_exec llcc_qcom gpu_sched drm_display_helper drm_dp_aux_bus drm_kms_helper leds_qcom_lpg led_class_multicolor led_class hid_multitouch i2c_qcom_geni i2c_hid_of i2c_hid drm i2c_core gpucc_x1e80100 gpucc_sc8280xp gpio_sbu_mux typec dispcc_x1e80100 dispcc_sc8280xp [ 2.014075] CPU: 0 UID: 0 PID: 93 Comm: kworker/u49:3 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 2.016050] Tainted: [W]=WARN [ 2.018010] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 2.020004] Workqueue: events_unbound deferred_probe_work_func [ 2.022010] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 2.024028] pc : gdsc_toggle_logic+0x144/0x15c [ 2.026048] lr : gdsc_toggle_logic+0x144/0x15c [ 2.028061] sp : ffff8000813639b0 [ 2.030068] x29: ffff8000813639b0 x28: 0000000000000000 x27: 0000000000000000 [ 2.032086] x26: 0000000000000000 x25: ffff6e7040b85040 x24: ffffb40900aff560 [ 2.034091] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 2.036107] x20: 0000000000000001 x19: ffffb40900aff560 x18: ffffffffffff1a50 [ 2.038110] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000004 [ 2.040104] x14: 00000b6434703810 x13: ffff6e7040f85580 x12: 0000000000000001 [ 2.042080] x11: 0000000000000000 x10: c9096e21652d6359 x9 : 2e5268aff7f10417 [ 2.044042] x8 : ffff6e7040f865c8 x7 : 0000000000000001 x6 : 0000000000000004 [ 2.045992] x5 : 00000000510f0010 x4 : 0000000000f0000f x3 : 0000000000c0000e [ 2.047922] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7040f85500 [ 2.049848] Call trace: [ 2.051750] gdsc_toggle_logic+0x144/0x15c [ 2.053637] gdsc_enable+0x60/0x280 [ 2.055499] _genpd_power_on+0x94/0x180 [ 2.057343] genpd_power_on+0xa8/0x168 [ 2.059176] __genpd_dev_pm_attach+0x124/0x2d0 [ 2.061013] genpd_dev_pm_attach+0x60/0x70 [ 2.062856] dev_pm_domain_attach+0x20/0x34 [ 2.064690] platform_probe+0x50/0xdc [ 2.066525] really_probe+0xc0/0x39c [ 2.068322] __driver_probe_device+0x7c/0x14c [ 2.070092] driver_probe_device+0x3c/0x120 [ 2.071813] __device_attach_driver+0xbc/0x158 [ 2.073486] bus_for_each_drv+0x88/0xe8 [ 2.075109] __device_attach+0xa0/0x1c0 [ 2.076698] device_initial_probe+0x14/0x20 [ 2.078237] bus_probe_device+0xb0/0xbc [ 2.079726] deferred_probe_work_func+0x9c/0xec [ 2.081170] process_one_work+0x148/0x284 [ 2.082586] worker_thread+0x2cc/0x3e8 [ 2.083946] kthread+0x110/0x114 [ 2.085251] ret_from_fork+0x10/0x20 [ 2.086505] ---[ end trace 0000000000000000 ]--- [ 2.088387] arm-scmi firmware:scmi: failed to setup channel for protocol:0x10 [ 2.090207] qcom-qmp-pcie-phy 1bfc000.phy: supply vdda-qref not found, using dummy regulator [ 2.091947] qcom-snps-eusb2-hsphy fd3000.phy: Registered Qcom-eUSB2 phy [ 2.092040] qcom-snps-eusb2-hsphy fd9000.phy: Registered Qcom-eUSB2 phy [ 2.094101] ------------[ cut here ]------------ [ 2.095865] gcc_usb20_prim_gdsc status stuck at 'off' [ 2.095875] WARNING: CPU: 2 PID: 93 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 2.097984] Modules linked in: usb_storage ufs_qcom tcsrcc_x1e80100 r8152 mii libphy qcom_q6v5_pas qcom_q6v5_adsp qcom_pil_info qcom_common qcom_glink_smem qcom_glink qcom_q6v5 qcom_sysmon qcom_pd_mapper pwm_bl pmic_glink_altmode qcom_battmgr aux_hpd_bridge qrtr pmic_glink rpmsg_core pdr_interface qcom_pdr_msg qmi_helpers phy_qcom_snps_eusb2 phy_qcom_qmp_usbc phy_qcom_qmp_usb phy_qcom_qmp_ufs phy_qcom_qmp_pcie phy_qcom_qmp_combo aux_bridge phy_qcom_eusb2_repeater phy_qcom_edp pcie_qcom crc8 panel_edp overlay nvme nvme_core msm mdt_loader drm_exec llcc_qcom gpu_sched drm_display_helper drm_dp_aux_bus drm_kms_helper leds_qcom_lpg led_class_multicolor led_class hid_multitouch i2c_qcom_geni i2c_hid_of i2c_hid drm i2c_core gpucc_x1e80100 gpucc_sc8280xp gpio_sbu_mux typec dispcc_x1e80100 dispcc_sc8280xp [ 2.103416] CPU: 2 UID: 0 PID: 93 Comm: kworker/u49:3 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 2.103418] Tainted: [W]=WARN [ 2.103418] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 2.103420] Workqueue: events_unbound deferred_probe_work_func [ 2.103422] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 2.103424] pc : gdsc_toggle_logic+0x144/0x15c [ 2.103425] lr : gdsc_toggle_logic+0x144/0x15c [ 2.103427] sp : ffff8000813639b0 [ 2.103427] x29: ffff8000813639b0 x28: 0000000000000000 x27: 0000000000000000 [ 2.103430] x26: 0000000000000000 x25: ffff6e7040b85040 x24: ffffb40900aff560 [ 2.103431] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 2.103433] x20: 0000000000000001 x19: ffffb40900aff560 x18: ffffffffffff2858 [ 2.103435] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000004 [ 2.103437] x14: 0000000000000000 x13: ffff6e7040f85580 x12: 0000000000000001 [ 2.103438] x11: 0000000000000000 x10: c9096e21652d6359 x9 : 2e5268aff7f10417 [ 2.103440] x8 : ffff6e7040f865c8 x7 : 0000000000000001 x6 : 0000000000000005 [ 2.103442] x5 : 00000000510f0010 x4 : 0000000000f0000f x3 : 0000000000c0000e [ 2.103443] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7040f85500 [ 2.103445] Call trace: [ 2.103446] gdsc_toggle_logic+0x144/0x15c [ 2.103447] gdsc_enable+0x60/0x280 [ 2.103449] _genpd_power_on+0x94/0x180 [ 2.103450] genpd_power_on+0xa8/0x168 [ 2.103452] __genpd_dev_pm_attach+0x124/0x2d0 [ 2.103453] genpd_dev_pm_attach+0x60/0x70 [ 2.103455] dev_pm_domain_attach+0x20/0x34 [ 2.103457] platform_probe+0x50/0xdc [ 2.103459] really_probe+0xc0/0x39c [ 2.103461] __driver_probe_device+0x7c/0x14c [ 2.103463] driver_probe_device+0x3c/0x120 [ 2.103464] __device_attach_driver+0xbc/0x158 [ 2.103466] bus_for_each_drv+0x88/0xe8 [ 2.103467] __device_attach+0xa0/0x1c0 [ 2.103469] device_initial_probe+0x14/0x20 [ 2.103471] bus_probe_device+0xb0/0xbc [ 2.142174] deferred_probe_work_func+0x9c/0xec [ 2.142176] process_one_work+0x148/0x284 [ 2.142179] worker_thread+0x2cc/0x3e8 [ 2.142181] kthread+0x110/0x114 [ 2.142182] ret_from_fork+0x10/0x20 [ 2.142184] ---[ end trace 0000000000000000 ]--- [ 2.145680] qcom-pcie 1bf8000.pci: supply vdda not found, using dummy regulator [ 2.146690] qcom-pcie 1c08000.pci: supply vdda not found, using dummy regulator [ 2.147804] qcom-pcie 1bf8000.pci: host bridge /soc@0/pci@1bf8000 ranges: [ 2.148790] qcom-pcie 1c08000.pci: supply vddpe-3v3 not found, using dummy regulator [ 2.149833] qcom-pcie 1bf8000.pci: IO 0x0070200000..0x00702fffff -> 0x0000000000 [ 2.150895] qcom-pcie 1c08000.pci: host bridge /soc@0/pci@1c08000 ranges: [ 2.151927] qcom-pcie 1bf8000.pci: MEM 0x0070300000..0x0071ffffff -> 0x0070300000 [ 2.152980] qcom-pcie 1c08000.pci: IO 0x007c200000..0x007c2fffff -> 0x0000000000 [ 2.157053] qcom-pcie 1c08000.pci: MEM 0x007c300000..0x007dffffff -> 0x007c300000 [ 2.176267] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.177105] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.180350] xhci-hcd xhci-hcd.0.auto: hcc params 0x0110ffc5 hci version 0x110 quirks 0x0000808000000810 [ 2.181192] xhci-hcd xhci-hcd.0.auto: irq 195, io mem 0x0a600000 [ 2.182064] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.182831] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.183601] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.1 Enhanced SuperSpeed [ 2.184749] hub 1-0:1.0: USB hub found [ 2.185540] hub 1-0:1.0: 1 port detected [ 2.186791] hub 2-0:1.0: USB hub found [ 2.187565] hub 2-0:1.0: 1 port detected [ 2.240503] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 2.241303] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 2.244539] xhci-hcd xhci-hcd.1.auto: hcc params 0x0110ffc5 hci version 0x110 quirks 0x0000808000000810 [ 2.245386] xhci-hcd xhci-hcd.1.auto: irq 196, io mem 0x0a800000 [ 2.246280] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 2.247070] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 2.247884] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.1 Enhanced SuperSpeed [ 2.249346] hub 3-0:1.0: USB hub found [ 2.250181] hub 3-0:1.0: 1 port detected [ 2.251317] hub 4-0:1.0: USB hub found [ 2.252136] hub 4-0:1.0: 1 port detected [ 2.254180] arm-scmi firmware:scmi: failed to setup channel for protocol:0x10 [ 2.257409] ------------[ cut here ]------------ [ 2.258231] gcc_usb20_prim_gdsc status stuck at 'off' [ 2.258241] WARNING: CPU: 0 PID: 93 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 2.259942] Modules linked in: usb_storage ufs_qcom tcsrcc_x1e80100 r8152 mii libphy qcom_q6v5_pas qcom_q6v5_adsp qcom_pil_info qcom_common qcom_glink_smem qcom_glink qcom_q6v5 qcom_sysmon qcom_pd_mapper pwm_bl pmic_glink_altmode qcom_battmgr aux_hpd_bridge qrtr pmic_glink rpmsg_core pdr_interface qcom_pdr_msg qmi_helpers phy_qcom_snps_eusb2 phy_qcom_qmp_usbc phy_qcom_qmp_usb phy_qcom_qmp_ufs phy_qcom_qmp_pcie phy_qcom_qmp_combo aux_bridge phy_qcom_eusb2_repeater phy_qcom_edp pcie_qcom crc8 panel_edp overlay nvme nvme_core msm mdt_loader drm_exec llcc_qcom gpu_sched drm_display_helper drm_dp_aux_bus drm_kms_helper leds_qcom_lpg led_class_multicolor led_class hid_multitouch i2c_qcom_geni i2c_hid_of i2c_hid drm i2c_core gpucc_x1e80100 gpucc_sc8280xp gpio_sbu_mux typec dispcc_x1e80100 dispcc_sc8280xp [ 2.265155] CPU: 0 UID: 0 PID: 93 Comm: kworker/u49:3 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 2.266291] Tainted: [W]=WARN [ 2.267415] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 2.268581] Workqueue: events_unbound deferred_probe_work_func [ 2.269757] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 2.270944] pc : gdsc_toggle_logic+0x144/0x15c [ 2.272130] lr : gdsc_toggle_logic+0x144/0x15c [ 2.273210] qcom-pcie 1bf8000.pci: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 1024G [ 2.273308] sp : ffff8000813639b0 [ 2.275722] x29: ffff8000813639b0 x28: 0000000000000000 x27: 0000000000000000 [ 2.276950] x26: 0000000000000000 x25: ffff6e7040b85040 x24: ffffb40900aff560 [ 2.277334] qcom-pcie 1c08000.pci: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 1024G [ 2.278170] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 2.280671] x20: 0000000000000001 x19: ffffb40900aff560 x18: ffffffffffff3dc8 [ 2.281923] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000004 [ 2.283169] x14: ffffb40900a5e900 x13: 6f27207461206b63 x12: 7574732073757461 [ 2.284412] x11: ffffb40900a5e900 x10: 00000000000004d1 x9 : ffffb40900ab6900 [ 2.285650] x8 : 0000000000017fe8 x7 : 00000000fffff4d0 x6 : ffffb40900ab6900 [ 2.286894] x5 : 00000000000004d0 x4 : 40000000fffff4d0 x3 : 0000000000000000 [ 2.288141] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7040f85500 [ 2.289371] Call trace: [ 2.290585] gdsc_toggle_logic+0x144/0x15c [ 2.291790] gdsc_enable+0x60/0x280 [ 2.292986] _genpd_power_on+0x94/0x180 [ 2.294169] genpd_power_on+0xa8/0x168 [ 2.295338] __genpd_dev_pm_attach+0x124/0x2d0 [ 2.296513] genpd_dev_pm_attach+0x60/0x70 [ 2.297683] dev_pm_domain_attach+0x20/0x34 [ 2.298850] platform_probe+0x50/0xdc [ 2.300001] really_probe+0xc0/0x39c [ 2.301155] __driver_probe_device+0x7c/0x14c [ 2.302318] driver_probe_device+0x3c/0x120 [ 2.303486] __device_attach_driver+0xbc/0x158 [ 2.304652] bus_for_each_drv+0x88/0xe8 [ 2.305813] __device_attach+0xa0/0x1c0 [ 2.306960] device_initial_probe+0x14/0x20 [ 2.308095] bus_probe_device+0xb0/0xbc [ 2.309231] deferred_probe_work_func+0x9c/0xec [ 2.310367] process_one_work+0x148/0x284 [ 2.311502] worker_thread+0x2cc/0x3e8 [ 2.312619] kthread+0x110/0x114 [ 2.313736] ret_from_fork+0x10/0x20 [ 2.314856] ---[ end trace 0000000000000000 ]--- [ 2.371945] qcom-pcie 1bf8000.pci: PCIe Gen.4 x4 link up [ 2.373348] qcom-pcie 1bf8000.pci: PCI host bridge to bus 0006:00 [ 2.374467] pci_bus 0006:00: root bus resource [bus 00-ff] [ 2.375586] pci_bus 0006:00: root bus resource [io 0x0000-0xfffff] [ 2.376699] pci_bus 0006:00: root bus resource [mem 0x70300000-0x71ffffff] [ 2.377770] pci 0006:00:00.0: [17cb:0111] type 01 class 0x060400 PCIe Root Port [ 2.378798] pci 0006:00:00.0: BAR 0 [mem 0x00000000-0x00000fff] [ 2.379714] qcom-pcie 1c08000.pci: PCIe Gen.3 x2 link up [ 2.379859] pci 0006:00:00.0: PCI bridge to [bus 01-ff] [ 2.381592] pci 0006:00:00.0: bridge window [io 0x0000-0x0fff] [ 2.382453] pci 0006:00:00.0: bridge window [mem 0x00000000-0x000fffff] [ 2.383299] pci 0006:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 2.384196] pci 0006:00:00.0: PME# supported from D0 D3hot D3cold [ 2.385904] pci 0006:01:00.0: [15b7:5016] type 00 class 0x010802 PCIe Endpoint [ 2.386854] pci 0006:01:00.0: BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 2.400084] pci 0006:00:00.0: bridge window [mem 0x70300000-0x703fffff]: assigned [ 2.400227] qcom-pcie 1c08000.pci: PCI host bridge to bus 0004:00 [ 2.400936] pci 0006:00:00.0: BAR 0 [mem 0x70400000-0x70400fff]: assigned [ 2.401753] pci_bus 0004:00: root bus resource [bus 00-ff] [ 2.402564] pci 0006:01:00.0: BAR 0 [mem 0x70300000-0x70303fff 64bit]: assigned [ 2.403372] pci_bus 0004:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x0000-0xfffff]) [ 2.404270] pci 0006:00:00.0: PCI bridge to [bus 01-ff] [ 2.405038] pci_bus 0004:00: root bus resource [mem 0x7c300000-0x7dffffff] [ 2.405862] pci 0006:00:00.0: bridge window [mem 0x70300000-0x703fffff] [ 2.406739] pci 0004:00:00.0: [17cb:0111] type 01 class 0x060400 PCIe Root Port [ 2.407533] pci_bus 0006:00: resource 4 [io 0x0000-0xfffff] [ 2.408381] pci 0004:00:00.0: BAR 0 [mem 0x00000000-0x00000fff] [ 2.409211] pci_bus 0006:00: resource 5 [mem 0x70300000-0x71ffffff] [ 2.410067] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 2.410911] pci_bus 0006:01: resource 1 [mem 0x70300000-0x703fffff] [ 2.411781] pci 0004:00:00.0: bridge window [io 0x100000-0x100fff] [ 2.413500] pci 0004:00:00.0: bridge window [mem 0x00000000-0x000fffff] [ 2.414371] pci 0004:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 2.415286] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 2.417166] pci 0004:01:00.0: [17cb:1107] type 00 class 0x028000 PCIe Endpoint [ 2.417358] pcieport 0006:00:00.0: PME: Signaling with IRQ 203 [ 2.418182] pci 0004:01:00.0: BAR 0 [mem 0x00000000-0x001fffff 64bit] [ 2.419095] arm-scmi firmware:scmi: failed to setup channel for protocol:0x10 [ 2.420720] pci 0004:01:00.0: PME# supported from D0 D3hot D3cold [ 2.421411] pcieport 0006:00:00.0: AER: enabled with IRQ 198 [ 2.422796] nvme nvme0: pci function 0006:01:00.0 [ 2.423065] ------------[ cut here ]------------ [ 2.423747] nvme 0006:01:00.0: enabling device (0000 -> 0002) [ 2.424650] gcc_usb20_prim_gdsc status stuck at 'off' [ 2.425612] WARNING: CPU: 1 PID: 93 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 2.427533] Modules linked in: usb_storage ufs_qcom tcsrcc_x1e80100 r8152 mii libphy qcom_q6v5_pas qcom_q6v5_adsp qcom_pil_info qcom_common qcom_glink_smem qcom_glink qcom_q6v5 qcom_sysmon qcom_pd_mapper pwm_bl pmic_glink_altmode qcom_battmgr aux_hpd_bridge qrtr pmic_glink rpmsg_core pdr_interface qcom_pdr_msg qmi_helpers phy_qcom_snps_eusb2 phy_qcom_qmp_usbc phy_qcom_qmp_usb phy_qcom_qmp_ufs phy_qcom_qmp_pcie phy_qcom_qmp_combo aux_bridge phy_qcom_eusb2_repeater phy_qcom_edp pcie_qcom crc8 panel_edp overlay nvme nvme_core msm mdt_loader drm_exec llcc_qcom gpu_sched drm_display_helper drm_dp_aux_bus drm_kms_helper leds_qcom_lpg led_class_multicolor led_class hid_multitouch i2c_qcom_geni i2c_hid_of i2c_hid drm i2c_core gpucc_x1e80100 gpucc_sc8280xp gpio_sbu_mux typec dispcc_x1e80100 dispcc_sc8280xp [ 2.431864] pci 0004:00:00.0: bridge window [mem 0x7c400000-0x7c5fffff]: assigned [ 2.433263] CPU: 1 UID: 0 PID: 93 Comm: kworker/u49:3 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 2.434494] pci 0004:00:00.0: BAR 0 [mem 0x7c300000-0x7c300fff]: assigned [ 2.435762] Tainted: [W]=WARN [ 2.435763] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 2.435764] Workqueue: events_unbound deferred_probe_work_func [ 2.437040] pci 0004:01:00.0: BAR 0 [mem 0x7c400000-0x7c5fffff 64bit]: assigned [ 2.439666] pci 0004:00:00.0: PCI bridge to [bus 01-ff] [ 2.440894] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 2.442220] pci 0004:00:00.0: bridge window [mem 0x7c400000-0x7c5fffff] [ 2.443518] pc : gdsc_toggle_logic+0x144/0x15c [ 2.444936] pci_bus 0004:00: resource 4 [io 0x100000-0x1fffff] [ 2.446160] lr : gdsc_toggle_logic+0x144/0x15c [ 2.447494] pci_bus 0004:00: resource 5 [mem 0x7c300000-0x7dffffff] [ 2.448824] sp : ffff8000813639b0 [ 2.448825] x29: ffff8000813639b0 x28: 0000000000000000 x27: 0000000000000000 [ 2.448827] x26: 0000000000000000 x25: ffff6e7040b85040 x24: ffffb40900aff560 [ 2.448829] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 2.448831] x20: 0000000000000001 x19: ffffb40900aff560 x18: ffffffffffffffff [ 2.448833] x17: 0000000000000000 x16: 0000000000000020 [ 2.450181] pci_bus 0004:01: resource 1 [mem 0x7c400000-0x7c5fffff] [ 2.451538] x15: ffff8000801bbda8 [ 2.457679] pcieport 0004:00:00.0: PME: Signaling with IRQ 206 [ 2.461905] pcieport 0004:00:00.0: AER: enabled with IRQ 206 [ 2.462369] x14: ffff8000801bbbb0 x13: ffff6e7040f85580 x12: 0000000000000001 [ 2.468914] x11: 0000000000000000 x10: c9096e21652d6359 x9 : 2e5268aff7f10417 [ 2.470230] x8 : ffff6e7040f865c8 x7 : 0000000000000001 x6 : 0000000000000012 [ 2.471551] x5 : 00000000510f0010 x4 : 0000000000f0000f x3 : 0000000000c0000e [ 2.472866] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7040f85500 [ 2.474171] Call trace: [ 2.475465] gdsc_toggle_logic+0x144/0x15c [ 2.476755] gdsc_enable+0x60/0x280 [ 2.478044] _genpd_power_on+0x94/0x180 [ 2.479339] genpd_power_on+0xa8/0x168 [ 2.480624] __genpd_dev_pm_attach+0x124/0x2d0 [ 2.481906] genpd_dev_pm_attach+0x60/0x70 [ 2.483179] dev_pm_domain_attach+0x20/0x34 [ 2.484445] platform_probe+0x50/0xdc [ 2.485696] really_probe+0xc0/0x39c [ 2.486931] __driver_probe_device+0x7c/0x14c [ 2.488163] driver_probe_device+0x3c/0x120 [ 2.489391] __device_attach_driver+0xbc/0x158 [ 2.490618] bus_for_each_drv+0x88/0xe8 [ 2.491839] __device_attach+0xa0/0x1c0 [ 2.493050] device_initial_probe+0x14/0x20 [ 2.494243] bus_probe_device+0xb0/0xbc [ 2.495390] deferred_probe_work_func+0x9c/0xec [ 2.496494] process_one_work+0x148/0x284 [ 2.497556] worker_thread+0x2cc/0x3e8 [ 2.498566] kthread+0x110/0x114 [ 2.499525] ret_from_fork+0x10/0x20 [ 2.500449] ---[ end trace 0000000000000000 ]--- [ 2.502049] arm-scmi firmware:scmi: failed to setup channel for protocol:0x10 [ 2.505404] ------------[ cut here ]------------ [ 2.506304] gcc_usb20_prim_gdsc status stuck at 'off' [ 2.506315] WARNING: CPU: 8 PID: 93 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 2.508128] Modules linked in: usb_storage ufs_qcom tcsrcc_x1e80100 r8152 mii libphy qcom_q6v5_pas qcom_q6v5_adsp qcom_pil_info qcom_common qcom_glink_smem qcom_glink qcom_q6v5 qcom_sysmon qcom_pd_mapper pwm_bl pmic_glink_altmode qcom_battmgr aux_hpd_bridge qrtr pmic_glink rpmsg_core pdr_interface qcom_pdr_msg qmi_helpers phy_qcom_snps_eusb2 phy_qcom_qmp_usbc phy_qcom_qmp_usb phy_qcom_qmp_ufs phy_qcom_qmp_pcie phy_qcom_qmp_combo aux_bridge phy_qcom_eusb2_repeater phy_qcom_edp pcie_qcom crc8 panel_edp overlay nvme nvme_core msm mdt_loader drm_exec llcc_qcom gpu_sched drm_display_helper drm_dp_aux_bus drm_kms_helper leds_qcom_lpg led_class_multicolor led_class hid_multitouch i2c_qcom_geni i2c_hid_of i2c_hid drm i2c_core gpucc_x1e80100 gpucc_sc8280xp gpio_sbu_mux typec dispcc_x1e80100 dispcc_sc8280xp [ 2.513399] CPU: 8 UID: 0 PID: 93 Comm: kworker/u49:3 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 2.514519] Tainted: [W]=WARN [ 2.515616] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 2.516744] Workqueue: events_unbound deferred_probe_work_func [ 2.517872] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 2.519005] pc : gdsc_toggle_logic+0x144/0x15c [ 2.520135] lr : gdsc_toggle_logic+0x144/0x15c [ 2.521250] sp : ffff8000813639b0 [ 2.522360] x29: ffff8000813639b0 x28: 0000000000000000 x27: 0000000000000000 [ 2.523489] x26: 0000000000000000 x25: ffff6e7040b85040 x24: ffffb40900aff560 [ 2.524620] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 2.525746] x20: 0000000000000001 x19: ffffb40900aff560 x18: ffffffffffff66a0 [ 2.526868] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000004 [ 2.527987] x14: ffffb40900a5e900 x13: 6f27207461206b63 x12: 7574732073757461 [ 2.529106] x11: ffffb40900a5e900 x10: 0000000000000565 x9 : ffffb40900ab6900 [ 2.530221] x8 : 0000000000017fe8 x7 : 00000000fffff564 x6 : ffffb40900ab6900 [ 2.531323] x5 : 0000000000000564 x4 : 40000000fffff564 x3 : 0000000000000000 [ 2.532417] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7040f85500 [ 2.533503] Call trace: [ 2.534584] gdsc_toggle_logic+0x144/0x15c [ 2.535670] gdsc_enable+0x60/0x280 [ 2.536744] _genpd_power_on+0x94/0x180 [ 2.537814] genpd_power_on+0xa8/0x168 [ 2.538884] __genpd_dev_pm_attach+0x124/0x2d0 [ 2.539959] genpd_dev_pm_attach+0x60/0x70 [ 2.541035] dev_pm_domain_attach+0x20/0x34 [ 2.542112] platform_probe+0x50/0xdc [ 2.543184] really_probe+0xc0/0x39c [ 2.544254] __driver_probe_device+0x7c/0x14c [ 2.545327] driver_probe_device+0x3c/0x120 [ 2.546403] __device_attach_driver+0xbc/0x158 [ 2.547481] bus_for_each_drv+0x88/0xe8 [ 2.548556] __device_attach+0xa0/0x1c0 [ 2.549628] device_initial_probe+0x14/0x20 [ 2.550699] bus_probe_device+0xb0/0xbc [ 2.551770] deferred_probe_work_func+0x9c/0xec [ 2.552847] process_one_work+0x148/0x284 [ 2.553927] worker_thread+0x2cc/0x3e8 [ 2.554999] kthread+0x110/0x114 [ 2.556065] ret_from_fork+0x10/0x20 [ 2.557130] ---[ end trace 0000000000000000 ]--- [ 2.657571] nvme nvme0: allocated 32 MiB host memory buffer. [ 2.666886] nvme nvme0: 12/0/0 default/read/poll queues [ 2.674946] nvme0n1: p1 p2 p3 p4 p5 p6 p7 [ 2.678601] arm-scmi firmware:scmi: failed to setup channel for protocol:0x10 [ 2.682105] ------------[ cut here ]------------ [ 2.683203] gcc_usb20_prim_gdsc status stuck at 'off' [ 2.683212] WARNING: CPU: 1 PID: 93 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 2.685406] Modules linked in: usb_storage ufs_qcom tcsrcc_x1e80100 r8152 mii libphy qcom_q6v5_pas qcom_q6v5_adsp qcom_pil_info qcom_common qcom_glink_smem qcom_glink qcom_q6v5 qcom_sysmon qcom_pd_mapper pwm_bl pmic_glink_altmode qcom_battmgr aux_hpd_bridge qrtr pmic_glink rpmsg_core pdr_interface qcom_pdr_msg qmi_helpers phy_qcom_snps_eusb2 phy_qcom_qmp_usbc phy_qcom_qmp_usb phy_qcom_qmp_ufs phy_qcom_qmp_pcie phy_qcom_qmp_combo aux_bridge phy_qcom_eusb2_repeater phy_qcom_edp pcie_qcom crc8 panel_edp overlay nvme nvme_core msm mdt_loader drm_exec llcc_qcom gpu_sched drm_display_helper drm_dp_aux_bus drm_kms_helper leds_qcom_lpg led_class_multicolor led_class hid_multitouch i2c_qcom_geni i2c_hid_of i2c_hid drm i2c_core gpucc_x1e80100 gpucc_sc8280xp gpio_sbu_mux typec dispcc_x1e80100 dispcc_sc8280xp [ 2.690991] CPU: 1 UID: 0 PID: 93 Comm: kworker/u49:3 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 2.692092] Tainted: [W]=WARN [ 2.693162] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 2.694252] Workqueue: events_unbound deferred_probe_work_func [ 2.695339] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 2.696427] pc : gdsc_toggle_logic+0x144/0x15c [ 2.697525] lr : gdsc_toggle_logic+0x144/0x15c [ 2.698612] sp : ffff8000813639b0 [ 2.699689] x29: ffff8000813639b0 x28: 0000000000000000 x27: 0000000000000000 [ 2.700785] x26: 0000000000000000 x25: ffff6e7040b85040 x24: ffffb40900aff560 [ 2.701885] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 2.702980] x20: 0000000000000001 x19: ffffb40900aff560 x18: ffffffffffff7460 [ 2.704077] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000004 [ 2.705170] x14: ffffb40900a5e900 x13: 6f27207461206b63 x12: 7574732073757461 [ 2.706268] x11: ffffb40900a5e900 x10: 0000000000000596 x9 : ffffb40900ab6900 [ 2.707369] x8 : 0000000000017fe8 x7 : 00000000fffff595 x6 : ffffb40900ab6900 [ 2.708471] x5 : 0000000000000595 x4 : 40000000fffff595 x3 : 0000000000000000 [ 2.709570] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7040f85500 [ 2.710658] Call trace: [ 2.711741] gdsc_toggle_logic+0x144/0x15c [ 2.712830] gdsc_enable+0x60/0x280 [ 2.713915] _genpd_power_on+0x94/0x180 [ 2.715002] genpd_power_on+0xa8/0x168 [ 2.716086] __genpd_dev_pm_attach+0x124/0x2d0 [ 2.717174] genpd_dev_pm_attach+0x60/0x70 [ 2.718261] dev_pm_domain_attach+0x20/0x34 [ 2.719348] platform_probe+0x50/0xdc [ 2.720436] really_probe+0xc0/0x39c [ 2.721520] __driver_probe_device+0x7c/0x14c [ 2.722607] driver_probe_device+0x3c/0x120 [ 2.723693] __device_attach_driver+0xbc/0x158 [ 2.724780] bus_for_each_drv+0x88/0xe8 [ 2.725868] __device_attach+0xa0/0x1c0 [ 2.726955] device_initial_probe+0x14/0x20 [ 2.728043] bus_probe_device+0xb0/0xbc [ 2.729127] deferred_probe_work_func+0x9c/0xec [ 2.730215] process_one_work+0x148/0x284 [ 2.731307] worker_thread+0x2cc/0x3e8 [ 2.732396] kthread+0x110/0x114 [ 2.733484] ret_from_fork+0x10/0x20 [ 2.734569] ---[ end trace 0000000000000000 ]--- [ 2.736343] arm-scmi firmware:scmi: failed to setup channel for protocol:0x10 [ 2.960387] F2FS-fs (nvme0n1p6): Mounted with checkpoint version = 78b837a7 [ 2.995732] systemd[1]: System time before build time, advancing clock. [ 3.003244] systemd[1]: Inserted module 'autofs4' [ 3.007457] NET: Registered PF_INET6 protocol family [ 3.009309] Segment Routing with IPv6 [ 3.010360] In-situ OAM (IOAM) with IPv6 [ 3.022834] systemd[1]: systemd 256.6-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE) [ 3.026358] systemd[1]: Detected architecture arm64. [ 3.031783] systemd[1]: Hostname set to <t14s>. [ 3.129467] systemd[1]: bpf-restrict-fs: BPF LSM hook not enabled in the kernel, BPF LSM not supported. [ 3.201004] systemd[1]: Queued start job for default target Graphical Interface. [ 3.244926] systemd[1]: Created slice Slice /system/dirmngr. [ 3.247852] systemd[1]: Created slice Slice /system/getty. [ 3.250620] systemd[1]: Created slice Slice /system/gpg-agent. [ 3.253427] systemd[1]: Created slice Slice /system/gpg-agent-browser. [ 3.256302] systemd[1]: Created slice Slice /system/gpg-agent-extra. [ 3.259229] systemd[1]: Created slice Slice /system/gpg-agent-ssh. [ 3.262201] systemd[1]: Created slice Slice /system/keyboxd. [ 3.265223] systemd[1]: Created slice Slice /system/modprobe. [ 3.268268] systemd[1]: Created slice Slice /system/systemd-fsck. [ 3.271204] systemd[1]: Created slice User and Session Slice. [ 3.274045] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 3.276829] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.279693] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.282347] systemd[1]: Expecting device /dev/disk/by-uuid/1617-A8E2... [ 3.284998] systemd[1]: Expecting device /dev/disk/by-uuid/EDA5-1110... [ 3.287680] systemd[1]: Expecting device /dev/disk/by-uuid/a38839a7-6abb-47f2-bd9f-2e2bc456f3e5... [ 3.290468] systemd[1]: Reached target Local Encrypted Volumes. [ 3.293278] systemd[1]: Reached target Login Prompts. [ 3.296094] systemd[1]: Reached target Local Integrity Protected Volumes. [ 3.298916] systemd[1]: Reached target Path Units. [ 3.301729] systemd[1]: Reached target Remote File Systems. [ 3.304572] systemd[1]: Reached target Slice Units. [ 3.307307] systemd[1]: Reached target Swaps. [ 3.309922] systemd[1]: Reached target Local Verity Protected Volumes. [ 3.312631] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 3.315407] systemd[1]: Listening on LVM2 poll daemon socket. [ 3.318837] systemd[1]: Listening on Process Core Dump Socket. [ 3.321860] systemd[1]: Listening on Credential Encryption/Decryption. [ 3.324632] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.327386] systemd[1]: Listening on Journal Sockets. [ 3.330094] systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 3.331485] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 3.332933] systemd[1]: Listening on udev Control Socket. [ 3.335736] systemd[1]: Listening on udev Kernel Socket. [ 3.338526] systemd[1]: Listening on User Database Manager Socket. [ 3.348124] systemd[1]: Mounting Huge Pages File System... [ 3.386915] systemd[1]: Mounting POSIX Message Queue File System... [ 3.390724] systemd[1]: Mounting Kernel Debug File System... [ 3.393789] systemd[1]: Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). [ 3.397641] systemd[1]: Starting Create List of Static Device Nodes... [ 3.401822] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 3.406603] systemd[1]: Starting Load Kernel Module configfs... [ 3.410029] systemd[1]: Starting Load Kernel Module dm_mod... [ 3.413325] systemd[1]: Starting Load Kernel Module drm... [ 3.416651] systemd[1]: Starting Load Kernel Module fuse... [ 3.416727] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 3.421169] systemd[1]: Starting Load Kernel Module loop... [ 3.423161] fuse: init (API version 7.40) [ 3.425535] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). [ 3.426985] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67). [ 3.431830] systemd[1]: Starting Journal Service... [ 3.435818] systemd[1]: Starting Load Kernel Modules... [ 3.438759] systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 3.440785] systemd[1]: Starting Remount Root and Kernel File Systems... [ 3.443915] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki). [ 3.445824] systemd[1]: Starting Load udev Rules from Credentials... [ 3.449411] systemd[1]: Starting Coldplug All udev Devices... [ 3.450215] systemd-journald[389]: Collecting audit messages is disabled. [ 3.455530] systemd[1]: Mounted Huge Pages File System. [ 3.458686] systemd[1]: Mounted POSIX Message Queue File System. [ 3.461772] systemd[1]: Mounted Kernel Debug File System. [ 3.464939] systemd[1]: Finished Create List of Static Device Nodes. [ 3.468068] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 3.469635] systemd[1]: Finished Load Kernel Module configfs. [ 3.472803] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 3.474367] systemd[1]: Finished Load Kernel Module dm_mod. [ 3.477359] systemd[1]: Started Journal Service. [ 3.504852] systemd-journald[389]: Received client request to flush runtime journal. [ 3.509821] synth uevent: /devices/platform/pmic-glink/pmic_glink.power-supply.0/power_supply/qcom-battmgr-ac: failed to send uevent [ 3.509824] power_supply qcom-battmgr-ac: uevent: failed to send synthetic uevent: -11 [ 3.509860] synth uevent: /devices/platform/pmic-glink/pmic_glink.power-supply.0/power_supply/qcom-battmgr-bat: failed to send uevent [ 3.509861] power_supply qcom-battmgr-bat: uevent: failed to send synthetic uevent: -11 [ 3.509887] synth uevent: /devices/platform/pmic-glink/pmic_glink.power-supply.0/power_supply/qcom-battmgr-usb: failed to send uevent [ 3.509888] power_supply qcom-battmgr-usb: uevent: failed to send synthetic uevent: -11 [ 3.509912] synth uevent: /devices/platform/pmic-glink/pmic_glink.power-supply.0/power_supply/qcom-battmgr-wls: failed to send uevent [ 3.509913] power_supply qcom-battmgr-wls: uevent: failed to send synthetic uevent: -11 [ 3.511662] systemd-journald[389]: /var/log/journal/9a042d70f46c4ef88c88ca9fdd497685/system.journal: Realtime clock jumped backwards relative to last journal entry, rotating. [ 3.524579] systemd-journald[389]: Rotating system journal. [ 3.748851] ------------[ cut here ]------------ [ 3.750123] gcc_usb20_prim_gdsc status stuck at 'off' [ 3.750130] WARNING: CPU: 2 PID: 93 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 3.752645] Modules linked in: nvmem_qcom_spmi_sdam(+) ps8830(+) snd_pcm regmap_i2c phy_nxp_ptn3222(+) qcom_stats snd_timer pinctrl_sm8550_lpass_lpi snd rfkill(+) mhi soundcore input_leds(+) lpasscc_sc8280xp pinctrl_lpass_lpi icc_bwmon arm_smccc_trng ucsi_glink qcom_cpucp_mbox typec_ucsi rng_core socinfo fuse dm_mod ip_tables x_tables ipv6 autofs4 usb_storage ufs_qcom tcsrcc_x1e80100 r8152 mii libphy qcom_q6v5_pas qcom_q6v5_adsp qcom_pil_info qcom_common qcom_glink_smem qcom_glink qcom_q6v5 qcom_sysmon qcom_pd_mapper pwm_bl pmic_glink_altmode qcom_battmgr aux_hpd_bridge qrtr pmic_glink rpmsg_core pdr_interface qcom_pdr_msg qmi_helpers phy_qcom_snps_eusb2 phy_qcom_qmp_usbc phy_qcom_qmp_usb phy_qcom_qmp_ufs phy_qcom_qmp_pcie phy_qcom_qmp_combo aux_bridge phy_qcom_eusb2_repeater phy_qcom_edp pcie_qcom crc8 panel_edp overlay nvme nvme_core msm mdt_loader drm_exec llcc_qcom gpu_sched drm_display_helper drm_dp_aux_bus drm_kms_helper leds_qcom_lpg led_class_multicolor led_class hid_multitouch i2c_qcom_geni i2c_hid_of i2c_hid [ 3.752700] drm [ 3.756220] ps8830_retimer 2-0008: supply vcc not found, using dummy regulator [ 3.762741] i2c_core gpucc_x1e80100 gpucc_sc8280xp gpio_sbu_mux typec dispcc_x1e80100 dispcc_sc8280xp [ 3.762748] CPU: 2 UID: 0 PID: 93 Comm: kworker/u49:3 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 3.769073] Tainted: [W]=WARN [ 3.769075] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 3.769076] Workqueue: events_unbound deferred_probe_work_func [ 3.769081] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 3.769083] pc : gdsc_toggle_logic+0x144/0x15c [ 3.769085] lr : gdsc_toggle_logic+0x144/0x15c [ 3.769087] sp : ffff8000813639b0 [ 3.769087] x29: ffff8000813639b0 x28: 0000000000000000 x27: 0000000000000000 [ 3.769090] x26: 0000000000000000 x25: ffff6e7040b85040 x24: ffffb40900aff560 [ 3.769092] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 3.769093] x20: 0000000000000001 x19: ffffb40900aff560 x18: ffffffffffff9dd0 [ 3.769095] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000004 [ 3.769097] x14: ffffb40900a5e900 x13: 6f27207461206b63 x12: 7574732073757461 [ 3.769099] x11: ffffb40900a5e900 x10: 000000000000061d x9 : ffffb40900ab6900 [ 3.769101] x8 : 0000000000017fe8 x7 : 00000000fffff61c x6 : ffffb40900ab6900 [ 3.769102] x5 : ffff6e779c525848 x4 : 40000000fffff61c x3 : ffffba6e9bc8f000 [ 3.769104] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7040f85500 [ 3.769106] Call trace: [ 3.769107] gdsc_toggle_logic+0x144/0x15c [ 3.769109] gdsc_enable+0x60/0x280 [ 3.769110] _genpd_power_on+0x94/0x180 [ 3.769112] genpd_power_on+0xa8/0x168 [ 3.769114] __genpd_dev_pm_attach+0x124/0x2d0 [ 3.769115] genpd_dev_pm_attach+0x60/0x70 [ 3.769117] dev_pm_domain_attach+0x20/0x34 [ 3.769120] platform_probe+0x50/0xdc [ 3.769122] really_probe+0xc0/0x39c [ 3.769123] __driver_probe_device+0x7c/0x14c [ 3.769125] driver_probe_device+0x3c/0x120 [ 3.769127] __device_attach_driver+0xbc/0x158 [ 3.769129] bus_for_each_drv+0x88/0xe8 [ 3.769131] __device_attach+0xa0/0x1c0 [ 3.769132] device_initial_probe+0x14/0x20 [ 3.769134] bus_probe_device+0xb0/0xbc [ 3.769136] deferred_probe_work_func+0x9c/0xec [ 3.769138] process_one_work+0x148/0x284 [ 3.769142] worker_thread+0x2cc/0x3e8 [ 3.769144] kthread+0x110/0x114 [ 3.769146] ret_from_fork+0x10/0x20 [ 3.769148] ---[ end trace 0000000000000000 ]--- [ 3.769522] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled. [ 3.783141] input: pmic_pwrkey as /devices/platform/soc@0/c400000.arbiter/spmi-0/0-00/c42d000.spmi:pmic@0:pon@1300/c42d000.spmi:pmic@0:pon@1300:pwrkey/input/input9 [ 3.784048] arm-scmi firmware:scmi: SCMI Protocol v2.0 'Qualcomm:' Firmware version 0x20000 [ 3.829139] arm-scmi firmware:scmi: Failed to get FC for protocol 13 [MSG_ID:6 / RES_ID:0] - ret:-95. Using regular messaging. [ 3.832277] arm-scmi firmware:scmi: Failed to get FC for protocol 13 [MSG_ID:6 / RES_ID:1] - ret:-95. Using regular messaging. [ 3.835284] arm-scmi firmware:scmi: Failed to get FC for protocol 13 [MSG_ID:6 / RES_ID:2] - ret:-95. Using regular messaging. [ 3.836772] cpu cpu0: EM: OPP:806400 is inefficient [ 3.836775] cpu cpu0: EM: OPP:710400 is inefficient [ 3.836857] cpu cpu0: EM: created perf domain [ 3.836858] energy_model: Accessing cpu4 policy failed [ 3.837093] cpu cpu4: EM: OPP:806400 is inefficient [ 3.837807] cpu cpu4: EM: OPP:710400 is inefficient [ 3.837891] cpu cpu4: EM: created perf domain [ 3.837892] energy_model: Accessing cpu8 policy failed [ 3.838123] cpu cpu8: EM: OPP:806400 is inefficient [ 3.838124] cpu cpu8: EM: OPP:710400 is inefficient [ 3.838203] cpu cpu8: EM: created perf domain [ 3.838275] scmi-perf-domain scmi_dev.4: Initialized 3 performance domains [ 3.839714] qcom-snps-eusb2-hsphy 88e0000.phy: Registered Qcom-eUSB2 phy [ 3.842579] qcom-snps-eusb2-hsphy 88e1000.phy: Registered Qcom-eUSB2 phy [ 3.843550] qcom-snps-eusb2-hsphy 88e2000.phy: Registered Qcom-eUSB2 phy [ 3.846168] ------------[ cut here ]------------ [ 3.847007] gcc_usb20_prim_gdsc status stuck at 'off' [ 3.847013] WARNING: CPU: 2 PID: 93 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 3.848734] Modules linked in: sm3_ce snd_soc_lpass_rx_macro snd_soc_lpass_tx_macro snd_soc_lpass_wsa_macro snd_soc_lpass_va_macro sm3 snd_soc_lpass_macro_common sha3_ce snd_soc_core qcom_spmi_temp_alarm sha512_ce qcom_pon(+) pwrseq_core sha512_arm64 reboot_mode industrialio snd_compress nvmem_qcom_spmi_sdam ps8830(+) snd_pcm regmap_i2c phy_nxp_ptn3222 qcom_stats snd_timer pinctrl_sm8550_lpass_lpi snd rfkill(+) mhi soundcore input_leds(+) lpasscc_sc8280xp pinctrl_lpass_lpi icc_bwmon arm_smccc_trng ucsi_glink qcom_cpucp_mbox typec_ucsi rng_core socinfo fuse dm_mod ip_tables x_tables ipv6 autofs4 usb_storage ufs_qcom tcsrcc_x1e80100 r8152 mii libphy qcom_q6v5_pas qcom_q6v5_adsp qcom_pil_info qcom_common qcom_glink_smem qcom_glink qcom_q6v5 qcom_sysmon qcom_pd_mapper pwm_bl pmic_glink_altmode qcom_battmgr aux_hpd_bridge qrtr pmic_glink rpmsg_core pdr_interface qcom_pdr_msg qmi_helpers phy_qcom_snps_eusb2 phy_qcom_qmp_usbc phy_qcom_qmp_usb phy_qcom_qmp_ufs phy_qcom_qmp_pcie phy_qcom_qmp_combo aux_bridge [ 3.848786] phy_qcom_eusb2_repeater phy_qcom_edp pcie_qcom crc8 panel_edp overlay nvme nvme_core msm mdt_loader drm_exec llcc_qcom gpu_sched drm_display_helper drm_dp_aux_bus drm_kms_helper leds_qcom_lpg led_class_multicolor led_class hid_multitouch i2c_qcom_geni i2c_hid_of i2c_hid drm i2c_core gpucc_x1e80100 gpucc_sc8280xp gpio_sbu_mux typec dispcc_x1e80100 dispcc_sc8280xp [ 3.855187] CPU: 2 UID: 0 PID: 93 Comm: kworker/u49:3 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 3.855189] Tainted: [W]=WARN [ 3.855190] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 3.855191] Workqueue: events_unbound deferred_probe_work_func [ 3.855196] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 3.855198] pc : gdsc_toggle_logic+0x144/0x15c [ 3.855200] lr : gdsc_toggle_logic+0x144/0x15c [ 3.855201] sp : ffff8000813639b0 [ 3.855202] x29: ffff8000813639b0 x28: 0000000000000000 x27: 0000000000000000 [ 3.855204] x26: 0000000000000000 x25: ffff6e7040b85040 x24: ffffb40900aff560 [ 3.855205] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 3.855207] x20: 0000000000000001 x19: ffffb40900aff560 x18: ffffffffffffb280 [ 3.855209] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000004 [ 3.855211] x14: ffffb40900a5e900 x13: 6f27207461206b63 x12: 7574732073757461 [ 3.855212] x11: ffffb40900a5e900 x10: 0000000000000662 x9 : ffffb40900ab6900 [ 3.855214] x8 : 0000000000017fe8 x7 : 00000000fffff661 x6 : ffffb40900ab6900 [ 3.855216] x5 : ffff6e779c525848 x4 : 40000000fffff661 [ 3.860150] ps8830_retimer 2-0008: Registered Parade PS8830 retimer [ 3.860267] x3 : ffffba6e9bc8f000 [ 3.860269] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7040f85500 [ 3.863583] ps8830_retimer 4-0008: supply vcc not found, using dummy regulator [ 3.864286] Call trace: [ 3.864287] gdsc_toggle_logic+0x144/0x15c [ 3.864289] gdsc_enable+0x60/0x280 [ 3.864290] _genpd_power_on+0x94/0x180 [ 3.864292] genpd_power_on+0xa8/0x168 [ 3.864293] __genpd_dev_pm_attach+0x124/0x2d0 [ 3.864295] genpd_dev_pm_attach+0x60/0x70 [ 3.864297] dev_pm_domain_attach+0x20/0x34 [ 3.864299] platform_probe+0x50/0xdc [ 3.904259] really_probe+0xc0/0x39c [ 3.904261] __driver_probe_device+0x7c/0x14c [ 3.904263] driver_probe_device+0x3c/0x120 [ 3.904264] __device_attach_driver+0xbc/0x158 [ 3.904266] bus_for_each_drv+0x88/0xe8 [ 3.904269] __device_attach+0xa0/0x1c0 [ 3.904270] device_initial_probe+0x14/0x20 [ 3.904272] bus_probe_device+0xb0/0xbc [ 3.904274] deferred_probe_work_func+0x9c/0xec [ 3.904275] process_one_work+0x148/0x284 [ 3.904279] worker_thread+0x2cc/0x3e8 [ 3.904281] kthread+0x110/0x114 [ 3.904283] ret_from_fork+0x10/0x20 [ 3.904284] ---[ end trace 0000000000000000 ]--- [ 3.910598] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 3.923828] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 5 [ 3.926312] xhci-hcd xhci-hcd.2.auto: hcc params 0x0118ffc5 hci version 0x110 quirks 0x0000808000000810 [ 3.927344] xhci-hcd xhci-hcd.2.auto: irq 232, io mem 0x0a400000 [ 3.928386] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 3.929285] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 6 [ 3.929288] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.1 Enhanced SuperSpeed [ 3.929637] hub 5-0:1.0: USB hub found [ 3.931880] hub 5-0:1.0: 2 ports detected [ 3.932588] hub 6-0:1.0: USB hub found [ 3.933625] hub 6-0:1.0: 2 ports detected [ 3.937904] ------------[ cut here ]------------ [ 3.938781] gcc_usb20_prim_gdsc status stuck at 'off' [ 3.938787] WARNING: CPU: 3 PID: 93 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 3.938792] Modules linked in: sm3_ce snd_soc_lpass_rx_macro snd_soc_lpass_tx_macro snd_soc_lpass_wsa_macro snd_soc_lpass_va_macro sm3 snd_soc_lpass_macro_common sha3_ce snd_soc_core qcom_spmi_temp_alarm sha512_ce qcom_pon(+) pwrseq_core sha512_arm64 reboot_mode industrialio snd_compress nvmem_qcom_spmi_sdam ps8830(+) snd_pcm regmap_i2c phy_nxp_ptn3222 qcom_stats snd_timer pinctrl_sm8550_lpass_lpi snd rfkill(+) mhi soundcore input_leds(+) lpasscc_sc8280xp pinctrl_lpass_lpi icc_bwmon arm_smccc_trng ucsi_glink qcom_cpucp_mbox typec_ucsi rng_core socinfo fuse dm_mod ip_tables x_tables ipv6 autofs4 usb_storage ufs_qcom tcsrcc_x1e80100 r8152 mii libphy qcom_q6v5_pas qcom_q6v5_adsp qcom_pil_info qcom_common qcom_glink_smem qcom_glink qcom_q6v5 qcom_sysmon qcom_pd_mapper pwm_bl pmic_glink_altmode qcom_battmgr aux_hpd_bridge qrtr pmic_glink rpmsg_core pdr_interface qcom_pdr_msg qmi_helpers phy_qcom_snps_eusb2 phy_qcom_qmp_usbc phy_qcom_qmp_usb phy_qcom_qmp_ufs phy_qcom_qmp_pcie phy_qcom_qmp_combo aux_bridge [ 3.938824] phy_qcom_eusb2_repeater phy_qcom_edp pcie_qcom crc8 panel_edp overlay nvme nvme_core msm mdt_loader drm_exec llcc_qcom gpu_sched drm_display_helper drm_dp_aux_bus drm_kms_helper leds_qcom_lpg led_class_multicolor led_class hid_multitouch i2c_qcom_geni i2c_hid_of i2c_hid drm i2c_core gpucc_x1e80100 gpucc_sc8280xp gpio_sbu_mux typec dispcc_x1e80100 dispcc_sc8280xp [ 3.946765] CPU: 3 UID: 0 PID: 93 Comm: kworker/u49:3 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 3.946767] Tainted: [W]=WARN [ 3.946768] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 3.946769] Workqueue: events_unbound deferred_probe_work_func [ 3.946772] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 3.946773] pc : gdsc_toggle_logic+0x144/0x15c [ 3.946775] lr : gdsc_toggle_logic+0x144/0x15c [ 3.946777] sp : ffff8000813639b0 [ 3.946777] x29: ffff8000813639b0 x28: 0000000000000000 x27: 0000000000000000 [ 3.946780] x26: 0000000000000000 x25: ffff6e7040b85040 x24: ffffb40900aff560 [ 3.946781] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 3.946783] x20: 0000000000000001 x19: ffffb40900aff560 x18: ffffffffffffc508 [ 3.946785] x17: 0000000000000000 x16: 0000000000000020 x15: 0000000000000004 [ 3.946787] x14: 0000000000000000 x13: 6f27207461206b63 x12: 7574732073757461 [ 3.946788] x11: ffffb40900a5e900 x10: 0000000000000027 x9 : ffff8000813639b0 [ 3.946790] x8 : ffffb40900a5e8a0 x7 : ffff800081363750 x6 : 000000000000000c [ 3.946792] x5 : ffff6e779c53b848 x4 : 00000000fffff69e x3 : ffffba6e9bca5000 [ 3.946794] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7040f85500 [ 3.946795] Call trace: [ 3.946796] gdsc_toggle_logic+0x144/0x15c [ 3.946798] gdsc_enable+0x60/0x280 [ 3.946799] _genpd_power_on+0x94/0x180 [ 3.946801] genpd_power_on+0xa8/0x168 [ 3.976204] ps8830_retimer 4-0008: Registered Parade PS8830 retimer [ 3.976501] __genpd_dev_pm_attach+0x124/0x2d0 [ 3.976504] genpd_dev_pm_attach+0x60/0x70 [ 3.987038] dev_pm_domain_attach+0x20/0x34 [ 3.987042] platform_probe+0x50/0xdc [ 3.987044] really_probe+0xc0/0x39c [ 3.987046] __driver_probe_device+0x7c/0x14c [ 3.987048] driver_probe_device+0x3c/0x120 [ 3.987049] __device_attach_driver+0xbc/0x158 [ 3.987051] bus_for_each_drv+0x88/0xe8 [ 3.987052] __device_attach+0xa0/0x1c0 [ 3.987054] device_initial_probe+0x14/0x20 [ 3.987056] bus_probe_device+0xb0/0xbc [ 3.987057] deferred_probe_work_func+0x9c/0xec [ 3.987059] process_one_work+0x148/0x284 [ 3.987065] worker_thread+0x2cc/0x3e8 [ 3.987067] kthread+0x110/0x114 [ 3.987069] ret_from_fork+0x10/0x20 [ 3.987071] ---[ end trace 0000000000000000 ]--- [ 3.990516] ------------[ cut here ]------------ [ 4.009962] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.010045] gcc_usb20_prim_gdsc status stuck at 'off' [ 4.011270] WARNING: CPU: 1 PID: 93 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 4.011273] Modules linked in: cfg80211(+) ecc sm3_ce snd_soc_lpass_rx_macro snd_soc_lpass_tx_macro snd_soc_lpass_wsa_macro snd_soc_lpass_va_macro sm3 snd_soc_lpass_macro_common sha3_ce snd_soc_core qcom_spmi_temp_alarm sha512_ce qcom_pon pwrseq_core sha512_arm64 reboot_mode industrialio snd_compress nvmem_qcom_spmi_sdam ps8830 snd_pcm regmap_i2c phy_nxp_ptn3222 qcom_stats snd_timer pinctrl_sm8550_lpass_lpi snd rfkill mhi soundcore input_leds lpasscc_sc8280xp pinctrl_lpass_lpi icc_bwmon arm_smccc_trng ucsi_glink qcom_cpucp_mbox typec_ucsi rng_core socinfo fuse dm_mod ip_tables x_tables ipv6 autofs4 usb_storage ufs_qcom tcsrcc_x1e80100 r8152 mii libphy qcom_q6v5_pas qcom_q6v5_adsp qcom_pil_info qcom_common qcom_glink_smem qcom_glink qcom_q6v5 qcom_sysmon qcom_pd_mapper pwm_bl pmic_glink_altmode qcom_battmgr aux_hpd_bridge qrtr pmic_glink rpmsg_core pdr_interface qcom_pdr_msg qmi_helpers phy_qcom_snps_eusb2 phy_qcom_qmp_usbc phy_qcom_qmp_usb phy_qcom_qmp_ufs phy_qcom_qmp_pcie phy_qcom_qmp_combo aux_bridge [ 4.011305] phy_qcom_eusb2_repeater phy_qcom_edp pcie_qcom crc8 panel_edp overlay nvme nvme_core msm mdt_loader drm_exec llcc_qcom gpu_sched drm_display_helper drm_dp_aux_bus drm_kms_helper leds_qcom_lpg led_class_multicolor led_class hid_multitouch i2c_qcom_geni i2c_hid_of i2c_hid drm i2c_core gpucc_x1e80100 gpucc_sc8280xp gpio_sbu_mux typec dispcc_x1e80100 dispcc_sc8280xp [ 4.011317] CPU: 1 UID: 0 PID: 93 Comm: kworker/u49:3 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 4.011320] Tainted: [W]=WARN [ 4.011320] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 4.011321] Workqueue: events_unbound deferred_probe_work_func [ 4.011324] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 4.011325] pc : gdsc_toggle_logic+0x144/0x15c [ 4.011327] lr : gdsc_toggle_logic+0x144/0x15c [ 4.011329] sp : ffff8000813639b0 [ 4.011330] x29: ffff8000813639b0 x28: 0000000000000000 x27: 0000000000000000 [ 4.011332] x26: 0000000000000000 x25: ffff6e7040b85040 x24: ffffb40900aff560 [ 4.011334] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 4.011336] x20: 0000000000000001 x19: ffffb40900aff560 x18: 0000000000000006 [ 4.011338] x17: ffff6e7040c11280 x16: 0000000000000ff6 x15: 0000000000000847 [ 4.011340] x14: 0000000000000002 x13: ffff6e7040f85580 x12: 00000000000ad700 [ 4.011341] x11: ffff6e7040f85580 x10: c9096e21652d6359 x9 : 2e5268aff7f10417 [ 4.011344] x8 : ffff6e7040f865c8 x7 : 0000000000000001 x6 : 0000000032e44a2a [ 4.011345] x5 : 00000000510f0010 x4 : 0000000000f0000f x3 : 0000000000c0000e [ 4.011347] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7040f85500 [ 4.011349] Call trace: [ 4.011350] gdsc_toggle_logic+0x144/0x15c [ 4.011351] gdsc_enable+0x60/0x280 [ 4.011353] _genpd_power_on+0x94/0x180 [ 4.011355] genpd_power_on+0xa8/0x168 [ 4.011356] __genpd_dev_pm_attach+0x124/0x2d0 [ 4.011358] genpd_dev_pm_attach+0x60/0x70 [ 4.011360] dev_pm_domain_attach+0x20/0x34 [ 4.011362] platform_probe+0x50/0xdc [ 4.011364] really_probe+0xc0/0x39c [ 4.011365] __driver_probe_device+0x7c/0x14c [ 4.011367] driver_probe_device+0x3c/0x120 [ 4.011369] __device_attach_driver+0xbc/0x158 [ 4.011372] bus_for_each_drv+0x88/0xe8 [ 4.011374] __device_attach+0xa0/0x1c0 [ 4.011376] device_initial_probe+0x14/0x20 [ 4.011378] bus_probe_device+0xb0/0xbc [ 4.011379] deferred_probe_work_func+0x9c/0xec [ 4.011381] process_one_work+0x148/0x284 [ 4.011383] worker_thread+0x2cc/0x3e8 [ 4.011385] kthread+0x110/0x114 [ 4.011387] ret_from_fork+0x10/0x20 [ 4.011388] ---[ end trace 0000000000000000 ]--- [ 4.014628] ------------[ cut here ]------------ [ 4.014684] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.014871] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 4.022593] gcc_usb20_prim_gdsc status stuck at 'off' [ 4.022651] WARNING: CPU: 3 PID: 93 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 4.026410] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 4.027509] Modules linked in: ecdh_generic [ 4.028775] cfg80211: failed to load regulatory.db [ 4.030060] cfg80211 ecc sm3_ce snd_soc_lpass_rx_macro snd_soc_lpass_tx_macro snd_soc_lpass_wsa_macro snd_soc_lpass_va_macro sm3 snd_soc_lpass_macro_common sha3_ce snd_soc_core qcom_spmi_temp_alarm sha512_ce qcom_pon pwrseq_core sha512_arm64 reboot_mode industrialio snd_compress nvmem_qcom_spmi_sdam ps8830 snd_pcm regmap_i2c phy_nxp_ptn3222 qcom_stats snd_timer pinctrl_sm8550_lpass_lpi snd rfkill mhi soundcore input_leds lpasscc_sc8280xp pinctrl_lpass_lpi icc_bwmon arm_smccc_trng ucsi_glink qcom_cpucp_mbox typec_ucsi rng_core socinfo fuse dm_mod ip_tables x_tables ipv6 autofs4 usb_storage ufs_qcom tcsrcc_x1e80100 r8152 mii libphy qcom_q6v5_pas qcom_q6v5_adsp qcom_pil_info qcom_common qcom_glink_smem qcom_glink qcom_q6v5 qcom_sysmon qcom_pd_mapper pwm_bl pmic_glink_altmode qcom_battmgr aux_hpd_bridge qrtr pmic_glink rpmsg_core pdr_interface qcom_pdr_msg qmi_helpers phy_qcom_snps_eusb2 phy_qcom_qmp_usbc phy_qcom_qmp_usb phy_qcom_qmp_ufs phy_qcom_qmp_pcie phy_qcom_qmp_combo aux_bridge phy_qcom_eusb2_repeater [ 4.087965] phy_qcom_edp pcie_qcom crc8 panel_edp overlay nvme nvme_core msm mdt_loader drm_exec llcc_qcom gpu_sched drm_display_helper drm_dp_aux_bus drm_kms_helper leds_qcom_lpg led_class_multicolor led_class hid_multitouch i2c_qcom_geni i2c_hid_of i2c_hid drm i2c_core gpucc_x1e80100 gpucc_sc8280xp gpio_sbu_mux typec dispcc_x1e80100 dispcc_sc8280xp [ 4.087976] CPU: 3 UID: 0 PID: 93 Comm: kworker/u49:3 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 4.087978] Tainted: [W]=WARN [ 4.087979] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 4.087980] Workqueue: events_unbound deferred_probe_work_func [ 4.087982] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 4.087984] pc : gdsc_toggle_logic+0x144/0x15c [ 4.087986] lr : gdsc_toggle_logic+0x144/0x15c [ 4.087987] sp : ffff8000813639b0 [ 4.109256] x29: ffff8000813639b0 x28: 0000000000000000 x27: 0000000000000000 [ 4.109258] x26: 0000000000000000 x25: ffff6e7040b85040 x24: ffffb40900aff560 [ 4.109260] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 4.109261] x20: 0000000000000001 x19: ffffb40900aff560 x18: 0000000000000000 [ 4.109263] x17: ffff6e7040c11800 x16: 0000000000002fe6 x15: 0000000000000e43 [ 4.109265] x14: 0000000000000001 x13: ffff6e7040f85580 x12: 0000000000000ff7 [ 4.109267] x11: 0000000000000000 x10: c9096e21652d6359 x9 : 2e5268aff7f10417 [ 4.109269] x8 : ffff6e7040f865c8 x7 : 0000000000000001 x6 : 000000000000002e [ 4.109270] x5 : 00000000510f0010 x4 : 0000000000f0000f x3 : 0000000000c0000e [ 4.109272] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7040f85500 [ 4.109274] Call trace: [ 4.109274] gdsc_toggle_logic+0x144/0x15c [ 4.109276] gdsc_enable+0x60/0x280 [ 4.109278] _genpd_power_on+0x94/0x180 [ 4.109279] genpd_power_on+0xa8/0x168 [ 4.109280] __genpd_dev_pm_attach+0x124/0x2d0 [ 4.109282] genpd_dev_pm_attach+0x60/0x70 [ 4.109284] dev_pm_domain_attach+0x20/0x34 [ 4.109285] platform_probe+0x50/0xdc [ 4.109287] really_probe+0xc0/0x39c [ 4.109289] __driver_probe_device+0x7c/0x14c [ 4.109290] driver_probe_device+0x3c/0x120 [ 4.109292] __device_attach_driver+0xbc/0x158 [ 4.109294] bus_for_each_drv+0x88/0xe8 [ 4.109295] __device_attach+0xa0/0x1c0 [ 4.109296] device_initial_probe+0x14/0x20 [ 4.109298] bus_probe_device+0xb0/0xbc [ 4.109300] deferred_probe_work_func+0x9c/0xec [ 4.109301] process_one_work+0x148/0x284 [ 4.109303] worker_thread+0x2cc/0x3e8 [ 4.148387] kthread+0x110/0x114 [ 4.148388] ret_from_fork+0x10/0x20 [ 4.148390] ---[ end trace 0000000000000000 ]--- [ 4.151093] msm_dpu ae01000.display-controller: bound ae90000.displayport-controller (ops dp_catalog_dump_regs [msm]) [ 4.151685] Bluetooth: Core ver 2.22 [ 4.151706] NET: Registered PF_BLUETOOTH protocol family [ 4.151707] Bluetooth: HCI device and connection manager initialized [ 4.151712] Bluetooth: HCI socket layer initialized [ 4.151715] Bluetooth: L2CAP socket layer initialized [ 4.151718] Bluetooth: SCO socket layer initialized [ 4.161202] Bluetooth: HCI UART driver ver 2.3 [ 4.161204] Bluetooth: HCI UART protocol H4 registered [ 4.161238] Bluetooth: HCI UART protocol QCA registered [ 4.161415] hci_uart_qca serial0-0: supply vddio not found, using dummy regulator [ 4.161770] msm_dpu ae01000.display-controller: bound ae98000.displayport-controller (ops dp_catalog_dump_regs [msm]) [ 4.170499] hci_uart_qca serial0-0: supply vddaon not found, using dummy regulator [ 4.170518] hci_uart_qca serial0-0: supply vdddig not found, using dummy regulator [ 4.170531] hci_uart_qca serial0-0: supply vddrfa0p8 not found, using dummy regulator [ 4.170546] hci_uart_qca serial0-0: supply vddrfa1p2 not found, using dummy regulator [ 4.170820] ath12k_pci 0004:01:00.0: BAR 0 [mem 0x7c400000-0x7c5fffff 64bit]: assigned [ 4.170911] ath12k_pci 0004:01:00.0: enabling device (0000 -> 0002) [ 4.172173] ath12k_pci 0004:01:00.0: MSI vectors: 16 [ 4.174329] hci_uart_qca serial0-0: supply vddrfa1p9 not found, using dummy regulator [ 4.175154] ath12k_pci 0004:01:00.0: Hardware name: wcn7850 hw2.0 [ 4.180579] Bluetooth: hci0: setting up wcn7850 [ 4.224274] msm_dpu ae01000.display-controller: bound aea0000.displayport-controller (ops dp_catalog_dump_regs [msm]) [ 4.225746] adreno 3d00000.gpu: supply vdd not found, using dummy regulator [ 4.226926] adreno 3d00000.gpu: supply vddcx not found, using dummy regulator [ 4.231260] platform 3d6a000.gmu: Adding to iommu group 8 [ 4.237646] msm_dpu ae01000.display-controller: bound 3d00000.gpu (ops dp_catalog_dump_regs [msm]) [ 4.239073] Console: switching to colour dummy device 80x25 [ 4.239595] [drm:dpu_kms_hw_init:1108] dpu hardware revision:0x90020000 [ 4.240903] [drm] Initialized msm 1.12.0 for ae01000.display-controller on minor 0 [ 4.241437] msm_dpu ae01000.display-controller: [drm:adreno_request_fw [msm]] loaded qcom/gen70500_sqe.fw from new location [ 4.241678] msm_dpu ae01000.display-controller: [drm:adreno_request_fw [msm]] loaded qcom/gen70500_gmu.bin from new location [ 4.243114] mhi mhi0: Requested to power ON [ 4.243127] mhi mhi0: Power on setup success [ 4.259828] Bluetooth: hci0: Frame reassembly failed (-84) [ 4.314124] Bluetooth: hci0: QCA Product ID :0x00000019 [ 4.314161] Bluetooth: hci0: QCA SOC Version :0x40170200 [ 4.314168] Bluetooth: hci0: QCA ROM Version :0x00000200 [ 4.314176] Bluetooth: hci0: QCA Patch Version:0x000043fb [ 4.324738] Bluetooth: hci0: QCA controller version 0x02000200 [ 4.324770] Bluetooth: hci0: QCA Downloading qca/hmtbtfw20.tlv [ 4.340027] mhi mhi0: Wait for device to enter SBL or Mission mode [ 4.543774] F2FS-fs (nvme0n1p7): Mounted with checkpoint version = 266a9332 [ 4.679586] Console: switching to colour frame buffer device 240x75 [ 4.679609] fb0: Framebuffer is not in virtual address space. [ 4.732493] msm_dpu ae01000.display-controller: [drm] fb0: msmdrmfb frame buffer device [ 4.734361] ------------[ cut here ]------------ [ 4.734425] gcc_usb20_prim_gdsc status stuck at 'off' [ 4.734435] WARNING: CPU: 4 PID: 93 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 4.734628] Modules linked in: ath12k hci_uart mac80211 snd_soc_hdmi_codec btqca libarc4 bluetooth ecdh_generic cfg80211 ecc sm3_ce snd_soc_lpass_rx_macro snd_soc_lpass_tx_macro snd_soc_lpass_wsa_macro snd_soc_lpass_va_macro sm3 snd_soc_lpass_macro_common sha3_ce snd_soc_core qcom_spmi_temp_alarm sha512_ce qcom_pon pwrseq_core sha512_arm64 reboot_mode industrialio snd_compress nvmem_qcom_spmi_sdam ps8830 snd_pcm regmap_i2c phy_nxp_ptn3222 qcom_stats snd_timer pinctrl_sm8550_lpass_lpi snd rfkill mhi soundcore input_leds lpasscc_sc8280xp pinctrl_lpass_lpi icc_bwmon arm_smccc_trng ucsi_glink qcom_cpucp_mbox typec_ucsi rng_core socinfo fuse dm_mod ip_tables x_tables ipv6 autofs4 usb_storage ufs_qcom tcsrcc_x1e80100 r8152 mii libphy qcom_q6v5_pas qcom_q6v5_adsp qcom_pil_info qcom_common qcom_glink_smem qcom_glink qcom_q6v5 qcom_sysmon qcom_pd_mapper pwm_bl pmic_glink_altmode qcom_battmgr aux_hpd_bridge qrtr pmic_glink rpmsg_core pdr_interface qcom_pdr_msg qmi_helpers phy_qcom_snps_eusb2 phy_qcom_qmp_usbc phy_qcom_qmp_usb [ 4.734729] phy_qcom_qmp_ufs phy_qcom_qmp_pcie phy_qcom_qmp_combo aux_bridge phy_qcom_eusb2_repeater phy_qcom_edp pcie_qcom crc8 panel_edp overlay nvme nvme_core msm mdt_loader drm_exec llcc_qcom gpu_sched drm_display_helper drm_dp_aux_bus drm_kms_helper leds_qcom_lpg led_class_multicolor led_class hid_multitouch i2c_qcom_geni i2c_hid_of i2c_hid drm i2c_core gpucc_x1e80100 gpucc_sc8280xp gpio_sbu_mux typec dispcc_x1e80100 dispcc_sc8280xp [ 4.736681] CPU: 4 UID: 0 PID: 93 Comm: kworker/u49:3 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 4.736688] Tainted: [W]=WARN [ 4.736690] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 4.736693] Workqueue: events_unbound deferred_probe_work_func [ 4.736702] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 4.736707] pc : gdsc_toggle_logic+0x144/0x15c [ 4.736712] lr : gdsc_toggle_logic+0x144/0x15c [ 4.736717] sp : ffff8000813639b0 [ 4.736718] x29: ffff8000813639b0 x28: 0000000000000000 x27: 0000000000000000 [ 4.736725] x26: 0000000000000000 x25: ffff6e7040b85040 x24: ffffb40900aff560 [ 4.736731] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 4.737767] x20: 0000000000000001 x19: ffffb40900aff560 x18: 0000000000000198 [ 4.737772] x17: 0000000000000018 x16: ffffb408ffb3b380 x15: ffffb40900ab6978 [ 4.737777] x14: ffffb40900a5e900 x13: 6f27207461206b63 x12: 7574732073757461 [ 4.737783] x11: ffffb40900a5e900 x10: 000000000000075e x9 : ffffb40900ab6900 [ 4.737788] x8 : 0000000000017fe8 x7 : 00000000fffff75d x6 : ffffb40900ab6900 [ 4.737793] x5 : ffff6e779c551848 x4 : 40000000fffff75d x3 : ffffba6e9bcbb000 [ 4.737799] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7040f85500 [ 4.737804] Call trace: [ 4.737806] gdsc_toggle_logic+0x144/0x15c [ 4.737811] gdsc_enable+0x60/0x280 [ 4.737816] _genpd_power_on+0x94/0x180 [ 4.739059] genpd_power_on+0xa8/0x168 [ 4.739063] __genpd_dev_pm_attach+0x124/0x2d0 [ 4.739068] genpd_dev_pm_attach+0x60/0x70 [ 4.739072] dev_pm_domain_attach+0x20/0x34 [ 4.739078] platform_probe+0x50/0xdc [ 4.739084] really_probe+0xc0/0x39c [ 4.739088] __driver_probe_device+0x7c/0x14c [ 4.739093] driver_probe_device+0x3c/0x120 [ 4.739098] __device_attach_driver+0xbc/0x158 [ 4.739102] bus_for_each_drv+0x88/0xe8 [ 4.739107] __device_attach+0xa0/0x1c0 [ 4.739112] device_initial_probe+0x14/0x20 [ 4.739117] bus_probe_device+0xb0/0xbc [ 4.739121] deferred_probe_work_func+0x9c/0xec [ 4.739126] process_one_work+0x148/0x284 [ 4.739134] worker_thread+0x2cc/0x3e8 [ 4.739140] kthread+0x110/0x114 [ 4.739144] ret_from_fork+0x10/0x20 [ 4.739148] ---[ end trace 0000000000000000 ]--- [ 4.743115] ------------[ cut here ]------------ [ 4.743701] fb0: Framebuffer is not in virtual address space. [ 4.789097] gcc_usb20_prim_gdsc status stuck at 'off' [ 4.789214] WARNING: CPU: 10 PID: 79 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 4.789227] Modules linked in: qrtr_mhi ath12k hci_uart mac80211 snd_soc_hdmi_codec btqca libarc4 bluetooth ecdh_generic cfg80211 ecc sm3_ce snd_soc_lpass_rx_macro snd_soc_lpass_tx_macro snd_soc_lpass_wsa_macro snd_soc_lpass_va_macro sm3 snd_soc_lpass_macro_common sha3_ce snd_soc_core qcom_spmi_temp_alarm sha512_ce qcom_pon pwrseq_core sha512_arm64 reboot_mode industrialio snd_compress nvmem_qcom_spmi_sdam ps8830 snd_pcm regmap_i2c phy_nxp_ptn3222 qcom_stats snd_timer pinctrl_sm8550_lpass_lpi snd rfkill mhi soundcore input_leds lpasscc_sc8280xp pinctrl_lpass_lpi icc_bwmon arm_smccc_trng ucsi_glink qcom_cpucp_mbox typec_ucsi rng_core socinfo fuse dm_mod ip_tables x_tables ipv6 autofs4 usb_storage ufs_qcom tcsrcc_x1e80100 r8152 mii libphy qcom_q6v5_pas qcom_q6v5_adsp qcom_pil_info qcom_common qcom_glink_smem qcom_glink qcom_q6v5 qcom_sysmon qcom_pd_mapper pwm_bl pmic_glink_altmode qcom_battmgr aux_hpd_bridge qrtr pmic_glink rpmsg_core pdr_interface qcom_pdr_msg qmi_helpers phy_qcom_snps_eusb2 phy_qcom_qmp_usbc [ 4.789292] phy_qcom_qmp_usb phy_qcom_qmp_ufs phy_qcom_qmp_pcie phy_qcom_qmp_combo aux_bridge phy_qcom_eusb2_repeater phy_qcom_edp pcie_qcom crc8 panel_edp overlay nvme nvme_core msm mdt_loader drm_exec llcc_qcom gpu_sched drm_display_helper drm_dp_aux_bus drm_kms_helper leds_qcom_lpg led_class_multicolor led_class hid_multitouch i2c_qcom_geni i2c_hid_of i2c_hid drm i2c_core gpucc_x1e80100 gpucc_sc8280xp gpio_sbu_mux typec dispcc_x1e80100 dispcc_sc8280xp [ 4.789323] CPU: 10 UID: 0 PID: 79 Comm: kworker/u51:0 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 4.789326] Tainted: [W]=WARN [ 4.789327] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 4.789329] Workqueue: events_unbound deferred_probe_work_func [ 4.789335] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 4.789338] pc : gdsc_toggle_logic+0x144/0x15c [ 4.789341] lr : gdsc_toggle_logic+0x144/0x15c [ 4.789343] sp : ffff8000803739b0 [ 4.789344] x29: ffff8000803739b0 x28: 0000000000000000 x27: 0000000000000000 [ 4.789347] x26: ffff6e7040019c28 x25: ffff6e7040c13580 x24: ffffb40900aff560 [ 4.907479] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 4.907483] x20: 0000000000000001 x19: ffffb40900aff560 x18: 0000000000000000 [ 4.907486] x17: ffff6e7040c11700 x16: 0000000000000ffd x15: 0000000000000047 [ 4.907490] x14: 000035465bdbee3a x13: 00000000fa83b2da x12: 0000000000000000 [ 4.907494] x11: 0000000000000001 x10: 312ee5fc07efd51e x9 : 8a4d1172b0677a38 [ 4.907497] x8 : ffff6e7040b3e5c8 x7 : 000000000000b67e x6 : 000000000000b6d8 [ 4.907501] x5 : 00000000510f0010 x4 : 0000000000f0000f x3 : 0000000000c0000e [ 4.907505] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7040b3d500 [ 4.907509] Call trace: [ 4.907510] gdsc_toggle_logic+0x144/0x15c [ 4.907514] gdsc_enable+0x60/0x280 [ 4.907517] _genpd_power_on+0x94/0x180 [ 4.907520] genpd_power_on+0xa8/0x168 [ 4.907523] __genpd_dev_pm_attach+0x124/0x2d0 [ 4.907526] genpd_dev_pm_attach+0x60/0x70 [ 4.907530] dev_pm_domain_attach+0x20/0x34 [ 4.907534] platform_probe+0x50/0xdc [ 4.907538] really_probe+0xc0/0x39c [ 4.907541] __driver_probe_device+0x7c/0x14c [ 4.907545] driver_probe_device+0x3c/0x120 [ 4.907548] __device_attach_driver+0xbc/0x158 [ 4.907552] bus_for_each_drv+0x88/0xe8 [ 4.907555] __device_attach+0xa0/0x1c0 [ 4.907558] device_initial_probe+0x14/0x20 [ 4.907562] bus_probe_device+0xb0/0xbc [ 4.907565] deferred_probe_work_func+0x9c/0xec [ 4.907568] process_one_work+0x148/0x284 [ 4.907575] worker_thread+0x2cc/0x3e8 [ 4.907579] kthread+0x110/0x114 [ 4.907582] ret_from_fork+0x10/0x20 [ 4.907585] ---[ end trace 0000000000000000 ]--- [ 4.923434] ath12k_pci 0004:01:00.0: chip_id 0x2 chip_family 0x4 board_id 0xff soc_id 0x40170200 [ 5.034844] ath12k_pci 0004:01:00.0: fw_version 0x100301e1 fw_build_timestamp 2023-12-06 04:05 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 [ 5.604184] Bluetooth: hci0: QCA Downloading qca/hmtnv20.b112 [ 6.020753] Bluetooth: hci0: QCA setup on UART is completed [ 6.117711] Bluetooth: MGMT ver 1.23 [ 6.126539] NET: Registered PF_ALG protocol family [ 13.047742] wlan0: authenticate with 3c:52:a1:6f:2f:ff (local address=58:cd:c9:bf:63:5d) [ 13.047766] wlan0: send auth to 3c:52:a1:6f:2f:ff (try 1/3) [ 13.055580] wlan0: authenticated [ 13.059779] wlan0: associate with 3c:52:a1:6f:2f:ff (try 1/3) [ 13.083708] wlan0: RX AssocResp from 3c:52:a1:6f:2f:ff (capab=0x1511 status=0 aid=2) [ 13.104473] wlan0: associated [ 13.229947] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 3c:52:a1:6f:2f:ff [ 14.822001] ------------[ cut here ]------------ [ 14.822016] gcc_usb20_prim_gdsc status stuck at 'off' [ 14.822033] WARNING: CPU: 0 PID: 82 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 14.822053] Modules linked in: michael_mic algif_hash algif_skcipher af_alg qrtr_mhi ath12k hci_uart mac80211 snd_soc_hdmi_codec btqca libarc4 bluetooth ecdh_generic cfg80211 ecc sm3_ce snd_soc_lpass_rx_macro snd_soc_lpass_tx_macro snd_soc_lpass_wsa_macro snd_soc_lpass_va_macro sm3 snd_soc_lpass_macro_common sha3_ce snd_soc_core qcom_spmi_temp_alarm sha512_ce qcom_pon pwrseq_core sha512_arm64 reboot_mode industrialio snd_compress nvmem_qcom_spmi_sdam ps8830 snd_pcm regmap_i2c phy_nxp_ptn3222 qcom_stats snd_timer pinctrl_sm8550_lpass_lpi snd rfkill mhi soundcore input_leds lpasscc_sc8280xp pinctrl_lpass_lpi icc_bwmon arm_smccc_trng ucsi_glink qcom_cpucp_mbox typec_ucsi rng_core socinfo fuse dm_mod ip_tables x_tables ipv6 autofs4 usb_storage ufs_qcom tcsrcc_x1e80100 r8152 mii libphy qcom_q6v5_pas qcom_q6v5_adsp qcom_pil_info qcom_common qcom_glink_smem qcom_glink qcom_q6v5 qcom_sysmon qcom_pd_mapper pwm_bl pmic_glink_altmode qcom_battmgr aux_hpd_bridge qrtr pmic_glink rpmsg_core pdr_interface qcom_pdr_msg qmi_helpers [ 14.822224] phy_qcom_snps_eusb2 phy_qcom_qmp_usbc phy_qcom_qmp_usb phy_qcom_qmp_ufs phy_qcom_qmp_pcie phy_qcom_qmp_combo aux_bridge phy_qcom_eusb2_repeater phy_qcom_edp pcie_qcom crc8 panel_edp overlay nvme nvme_core msm mdt_loader drm_exec llcc_qcom gpu_sched drm_display_helper drm_dp_aux_bus drm_kms_helper leds_qcom_lpg led_class_multicolor led_class hid_multitouch i2c_qcom_geni i2c_hid_of i2c_hid drm i2c_core gpucc_x1e80100 gpucc_sc8280xp gpio_sbu_mux typec dispcc_x1e80100 dispcc_sc8280xp [ 14.822306] CPU: 0 UID: 0 PID: 82 Comm: kworker/u49:1 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 14.822317] Tainted: [W]=WARN [ 14.822320] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 14.822325] Workqueue: events_unbound deferred_probe_work_func [ 14.822338] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 14.822345] pc : gdsc_toggle_logic+0x144/0x15c [ 14.822353] lr : gdsc_toggle_logic+0x144/0x15c [ 14.822359] sp : ffff8000803939b0 [ 14.822363] x29: ffff8000803939b0 x28: 0000000000000000 x27: 0000000000000000 [ 14.822373] x26: ffff6e7040019428 x25: ffff6e7040a12040 x24: ffffb40900aff560 [ 14.822382] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 14.822390] x20: 0000000000000001 x19: ffffb40900aff560 x18: 0000000000002480 [ 14.822399] x17: 0000000000000001 x16: 0000000000000000 x15: ffff8000803934ef [ 14.822407] x14: ffffb40900a5e900 x13: 6f27207461206b63 x12: 7574732073757461 [ 14.822416] x11: ffffb40900a5e900 x10: 00000000000007c8 x9 : ffffb40900ab6900 [ 14.822425] x8 : 0000000000017fe8 x7 : 00000000fffff7c7 x6 : ffffb40900ab6900 [ 14.822433] x5 : ffff6e779c4f9848 x4 : 40000000fffff7c7 x3 : ffffba6e9bc63000 [ 14.822442] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7040f69100 [ 14.822450] Call trace: [ 14.822454] gdsc_toggle_logic+0x144/0x15c [ 14.822461] gdsc_enable+0x60/0x280 [ 14.822468] _genpd_power_on+0x94/0x180 [ 14.822474] genpd_power_on+0xa8/0x168 [ 14.822480] __genpd_dev_pm_attach+0x124/0x2d0 [ 14.822487] genpd_dev_pm_attach+0x60/0x70 [ 14.822494] dev_pm_domain_attach+0x20/0x34 [ 14.822504] platform_probe+0x50/0xdc [ 14.822512] really_probe+0xc0/0x39c [ 14.822518] __driver_probe_device+0x7c/0x14c [ 14.822525] driver_probe_device+0x3c/0x120 [ 14.822532] __device_attach_driver+0xbc/0x158 [ 14.822539] bus_for_each_drv+0x88/0xe8 [ 14.822546] __device_attach+0xa0/0x1c0 [ 14.822553] device_initial_probe+0x14/0x20 [ 14.822560] bus_probe_device+0xb0/0xbc [ 14.822566] deferred_probe_work_func+0x9c/0xec [ 14.822573] process_one_work+0x148/0x284 [ 14.822588] worker_thread+0x2cc/0x3e8 [ 14.822595] kthread+0x110/0x114 [ 14.822602] ret_from_fork+0x10/0x20 [ 14.822608] ---[ end trace 0000000000000000 ]--- [ 14.823354] platform 6e80000.pinctrl: deferred probe pending: qcom-sm8550-lpass-lpi-pinctrl: Failed to get clk 'core' [ 14.823364] platform a2f8800.usb: deferred probe pending: (reason unknown) [ 14.823369] platform 6aa0000.codec: deferred probe pending: wsa_macro: unable to get macro clock [ 14.823373] platform 6ae0000.codec: deferred probe pending: tx_macro: unable to get macro clock [ 14.823378] platform 6b00000.codec: deferred probe pending: wsa_macro: unable to get macro clock [ 14.823382] platform 6ac0000.codec: deferred probe pending: rx_macro: unable to get macro clock [ 14.823386] platform 6d44000.codec: deferred probe pending: va_macro: unable to get macro clock [ 33.167930] block nvme0n1: No UUID available providing old NGUID [ 33.198645] Bluetooth: RFCOMM socket layer initialized [ 33.198655] Bluetooth: RFCOMM ver 1.11 [ 114.300713] usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd [ 114.449970] usb-storage 6-1:1.0: USB Mass Storage device detected [ 114.457616] scsi host0: usb-storage 6-1:1.0 [ 114.459658] ------------[ cut here ]------------ [ 114.459660] gcc_usb20_prim_gdsc status stuck at 'off' [ 114.459668] WARNING: CPU: 2 PID: 82 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 114.459678] Modules linked in: rfcomm michael_mic algif_hash algif_skcipher af_alg qrtr_mhi ath12k hci_uart mac80211 snd_soc_hdmi_codec btqca libarc4 bluetooth ecdh_generic cfg80211 ecc sm3_ce snd_soc_lpass_rx_macro snd_soc_lpass_tx_macro snd_soc_lpass_wsa_macro snd_soc_lpass_va_macro sm3 snd_soc_lpass_macro_common sha3_ce snd_soc_core qcom_spmi_temp_alarm sha512_ce qcom_pon pwrseq_core sha512_arm64 reboot_mode industrialio snd_compress nvmem_qcom_spmi_sdam ps8830 snd_pcm regmap_i2c phy_nxp_ptn3222 qcom_stats snd_timer pinctrl_sm8550_lpass_lpi snd rfkill mhi soundcore input_leds lpasscc_sc8280xp pinctrl_lpass_lpi icc_bwmon arm_smccc_trng ucsi_glink qcom_cpucp_mbox typec_ucsi rng_core socinfo fuse dm_mod ip_tables x_tables ipv6 autofs4 usb_storage ufs_qcom tcsrcc_x1e80100 r8152 mii libphy qcom_q6v5_pas qcom_q6v5_adsp qcom_pil_info qcom_common qcom_glink_smem qcom_glink qcom_q6v5 qcom_sysmon qcom_pd_mapper pwm_bl pmic_glink_altmode qcom_battmgr aux_hpd_bridge qrtr pmic_glink rpmsg_core pdr_interface qcom_pdr_msg [ 114.459749] qmi_helpers phy_qcom_snps_eusb2 phy_qcom_qmp_usbc phy_qcom_qmp_usb phy_qcom_qmp_ufs phy_qcom_qmp_pcie phy_qcom_qmp_combo aux_bridge phy_qcom_eusb2_repeater phy_qcom_edp pcie_qcom crc8 panel_edp overlay nvme nvme_core msm mdt_loader drm_exec llcc_qcom gpu_sched drm_display_helper drm_dp_aux_bus drm_kms_helper leds_qcom_lpg led_class_multicolor led_class hid_multitouch i2c_qcom_geni i2c_hid_of i2c_hid drm i2c_core gpucc_x1e80100 gpucc_sc8280xp gpio_sbu_mux typec dispcc_x1e80100 dispcc_sc8280xp [ 114.459784] CPU: 2 UID: 0 PID: 82 Comm: kworker/u49:1 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 114.459788] Tainted: [W]=WARN [ 114.459789] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 114.459791] Workqueue: events_unbound deferred_probe_work_func [ 114.459796] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 114.459798] pc : gdsc_toggle_logic+0x144/0x15c [ 114.459801] lr : gdsc_toggle_logic+0x144/0x15c [ 114.459803] sp : ffff8000803939b0 [ 114.459804] x29: ffff8000803939b0 x28: 0000000000000000 x27: 0000000000000000 [ 114.459807] x26: ffff6e7040019428 x25: ffff6e7040a12040 x24: ffffb40900aff560 [ 114.459809] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 114.459812] x20: 0000000000000001 x19: ffffb40900aff560 x18: 0000000000003818 [ 114.459814] x17: 0000000000000001 x16: 0000000000000000 x15: ffffb40900ab78d8 [ 114.459817] x14: ffffb40900a5e900 x13: 6f27207461206b63 x12: 7574732073757461 [ 114.459819] x11: ffffb40900a5e900 x10: 0000000000000803 x9 : ffffb40900ab6900 [ 114.459822] x8 : 0000000000017fe8 x7 : 00000000fffff802 x6 : ffffb40900ab6900 [ 114.459824] x5 : ffff6e779c525848 x4 : 40000000fffff802 x3 : ffffba6e9bc8f000 [ 114.459827] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7040f69100 [ 114.459829] Call trace: [ 114.459831] gdsc_toggle_logic+0x144/0x15c [ 114.459833] gdsc_enable+0x60/0x280 [ 114.459835] _genpd_power_on+0x94/0x180 [ 114.459837] genpd_power_on+0xa8/0x168 [ 114.459839] __genpd_dev_pm_attach+0x124/0x2d0 [ 114.459841] genpd_dev_pm_attach+0x60/0x70 [ 114.459843] dev_pm_domain_attach+0x20/0x34 [ 114.459847] platform_probe+0x50/0xdc [ 114.459849] really_probe+0xc0/0x39c [ 114.459851] __driver_probe_device+0x7c/0x14c [ 114.459853] driver_probe_device+0x3c/0x120 [ 114.459855] __device_attach_driver+0xbc/0x158 [ 114.459857] bus_for_each_drv+0x88/0xe8 [ 114.459859] __device_attach+0xa0/0x1c0 [ 114.459861] device_initial_probe+0x14/0x20 [ 114.459863] bus_probe_device+0xb0/0xbc [ 114.459865] deferred_probe_work_func+0x9c/0xec [ 114.459867] process_one_work+0x148/0x284 [ 114.459873] worker_thread+0x2cc/0x3e8 [ 114.459875] kthread+0x110/0x114 [ 114.459877] ret_from_fork+0x10/0x20 [ 114.459879] ---[ end trace 0000000000000000 ]--- [ 115.933444] scsi 0:0:0:0: Direct-Access Samsung Flash Drive FIT 1100 PQ: 0 ANSI: 6 [ 115.937269] sd 0:0:0:0: [sda] 250626566 512-byte logical blocks: (128 GB/120 GiB) [ 115.937661] sd 0:0:0:0: [sda] Write Protect is off [ 115.937665] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 115.938103] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 115.978132] sda: sda1 sda2 [ 115.978961] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 115.980907] ------------[ cut here ]------------ [ 115.980913] gcc_usb20_prim_gdsc status stuck at 'off' [ 115.980928] WARNING: CPU: 3 PID: 102 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x144/0x15c [ 115.980948] Modules linked in: rfcomm michael_mic algif_hash algif_skcipher af_alg qrtr_mhi ath12k hci_uart mac80211 snd_soc_hdmi_codec btqca libarc4 bluetooth ecdh_generic cfg80211 ecc sm3_ce snd_soc_lpass_rx_macro snd_soc_lpass_tx_macro snd_soc_lpass_wsa_macro snd_soc_lpass_va_macro sm3 snd_soc_lpass_macro_common sha3_ce snd_soc_core qcom_spmi_temp_alarm sha512_ce qcom_pon pwrseq_core sha512_arm64 reboot_mode industrialio snd_compress nvmem_qcom_spmi_sdam ps8830 snd_pcm regmap_i2c phy_nxp_ptn3222 qcom_stats snd_timer pinctrl_sm8550_lpass_lpi snd rfkill mhi soundcore input_leds lpasscc_sc8280xp pinctrl_lpass_lpi icc_bwmon arm_smccc_trng ucsi_glink qcom_cpucp_mbox typec_ucsi rng_core socinfo fuse dm_mod ip_tables x_tables ipv6 autofs4 usb_storage ufs_qcom tcsrcc_x1e80100 r8152 mii libphy qcom_q6v5_pas qcom_q6v5_adsp qcom_pil_info qcom_common qcom_glink_smem qcom_glink qcom_q6v5 qcom_sysmon qcom_pd_mapper pwm_bl pmic_glink_altmode qcom_battmgr aux_hpd_bridge qrtr pmic_glink rpmsg_core pdr_interface qcom_pdr_msg [ 115.981113] qmi_helpers phy_qcom_snps_eusb2 phy_qcom_qmp_usbc phy_qcom_qmp_usb phy_qcom_qmp_ufs phy_qcom_qmp_pcie phy_qcom_qmp_combo aux_bridge phy_qcom_eusb2_repeater phy_qcom_edp pcie_qcom crc8 panel_edp overlay nvme nvme_core msm mdt_loader drm_exec llcc_qcom gpu_sched drm_display_helper drm_dp_aux_bus drm_kms_helper leds_qcom_lpg led_class_multicolor led_class hid_multitouch i2c_qcom_geni i2c_hid_of i2c_hid drm i2c_core gpucc_x1e80100 gpucc_sc8280xp gpio_sbu_mux typec dispcc_x1e80100 dispcc_sc8280xp [ 115.981195] CPU: 3 UID: 0 PID: 102 Comm: kworker/u49:6 Tainted: G W 6.11.0-1-x1e-g8844062a2d5e #1 [ 115.981204] Tainted: [W]=WARN [ 115.981208] Hardware name: LENOVO 21N10004CD/21N10004CD, BIOS N42ET57W (1.31 ) 08/08/2024 [ 115.981213] Workqueue: events_unbound deferred_probe_work_func [ 115.981225] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 115.981232] pc : gdsc_toggle_logic+0x144/0x15c [ 115.981239] lr : gdsc_toggle_logic+0x144/0x15c [ 115.981246] sp : ffff8000813ab9b0 [ 115.981249] x29: ffff8000813ab9b0 x28: 0000000000000000 x27: 0000000000000000 [ 115.981259] x26: ffff6e7040019428 x25: ffff6e7040dfc040 x24: ffffb40900aff560 [ 115.981268] x23: ffffb40900b26d68 x22: 0000000000000001 x21: ffffb40900affa00 [ 115.981277] x20: 0000000000000001 x19: ffffb40900aff560 x18: 0000000000004988 [ 115.981286] x17: ffffb40900b2e940 x16: 0000000000000000 x15: ffffb40900ab7ed8 [ 115.981294] x14: ffffb40900a5e900 x13: 6f27207461206b63 x12: 7574732073757461 [ 115.981303] x11: ffffb40900a5e900 x10: 0000000000000838 x9 : ffffb40900ab6900 [ 115.981312] x8 : 0000000000017fe8 x7 : 00000000fffff837 x6 : ffffb40900ab6900 [ 115.981321] x5 : ffff6e779c53b848 x4 : 40000000fffff837 x3 : ffffba6e9bca5000 [ 115.981329] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6e7042c11100 [ 115.981338] Call trace: [ 115.981341] gdsc_toggle_logic+0x144/0x15c [ 115.981348] gdsc_enable+0x60/0x280 [ 115.981355] _genpd_power_on+0x94/0x180 [ 115.981361] genpd_power_on+0xa8/0x168 [ 115.981368] __genpd_dev_pm_attach+0x124/0x2d0 [ 115.981375] genpd_dev_pm_attach+0x60/0x70 [ 115.981382] dev_pm_domain_attach+0x20/0x34 [ 115.981389] platform_probe+0x50/0xdc [ 115.981397] really_probe+0xc0/0x39c [ 115.981404] __driver_probe_device+0x7c/0x14c [ 115.981411] driver_probe_device+0x3c/0x120 [ 115.981418] __device_attach_driver+0xbc/0x158 [ 115.981425] bus_for_each_drv+0x88/0xe8 [ 115.981431] __device_attach+0xa0/0x1c0 [ 115.981438] device_initial_probe+0x14/0x20 [ 115.981445] bus_probe_device+0xb0/0xbc [ 115.981452] deferred_probe_work_func+0x9c/0xec [ 115.981458] process_one_work+0x148/0x284 [ 115.981470] worker_thread+0x2cc/0x3e8 [ 115.981478] kthread+0x110/0x114 [ 115.981484] ret_from_fork+0x10/0x20 [ 115.981490] ---[ end trace 0000000000000000 ]--- [ 123.789888] EXT4-fs (sda2): recovery complete [ 123.795335] EXT4-fs (sda2): mounted filesystem d9e62c58-bd91-4580-8692-5455c055cb08 r/w with ordered data mode. Quota mode: none. [ 146.347665] EXT4-fs (sda2): unmounting filesystem d9e62c58-bd91-4580-8692-5455c055cb08. [ 146.432408] sda: detected capacity change from 250626566 to 0 [ 148.740829] usb 6-1: USB disconnect, device number 2 [ 149.174761] usb 5-1: new high-speed USB device number 2 using xhci-hcd